[. . . ] SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc. , is used, please observe all safety markings and instructions that accompany the accessory product. [. . . ] [4] icons will flash, indicating that you must select one of the corresponding record modes.
13 UserSng1
VOICE L
76
REPEAT
VOICE R2
101
VOICE
0
REVERB TRANSPOSE
1
MULTI PAD
116
HARMONY TEMPO
REGISTRATION
1
SYNC STOP
1
2
3
4
STYLE
FINGERING CHORD 2 PAD PHRASE 1 PHRASE 2
CHORUS
DSP BASS
RHYTHM RHYTHM 1 2
CHORD 1
SONG
MELODY MELODY MELODY MELODY ACCOM1 2 3 4 PANIMENT VOICE VOICE VOICE
L
R2
R1
MINUS ONE
71
QQQQQQQQQQQQQQQ , , , , , , , , , , , , , , , QQQQQQQQQQQQQQQ , , , , , , , , , , , , , , ,
Multi Pad Recording
2 Select the MULTI PAD Record Mode
Press any MULTI PAD button ([1] . . . [4]) to select the MULTI PAD record mode (the MULTI PAD button you press will be selected for recording). The MULTI PAD menu will automatically be selected and a user pad set number will appear on the top line of the display. The beat indicator dots will flash at the currently set tempo, indicating that the record ready (synchro-start) mode is engaged.
MUTLI PAD
1
2
3
4
· If the [RECORD] button is pressed while a preset pad set is selected, the lowestnumbered user pad set which does not contain any recorded data will automatically be selected. If other user pad sets already contain data, however, user pad number 1 will be selected. · The DSP effect cannot be turned on during MULTI PAD recording or the MULTI PAD record standby mode. If the DSP effect is on when the MULTI PAD record mode is engaged, it will automatically be turned off. · If the Metronome function is on (page 85), the metronome will sound at the current tempo.
007 UserPad1
VOICE L
76
REPEAT
VOICE R2
101
MEASURE
REGIST MEMORY MULTI PAD
0
REVERB TRANSPOSE
1
4
116
HARMONY TEMPO
REGISTRATION
MULTI PAD
1
SYNC STOP
1
2
3
CHORUS
DSP BASS
FINGERING CHORD 2 PAD PHRASE 1 PHRASE 2
MIDI
RHYTHM RHYTHM 2 1
CHORD 1
DIGITAL EFFECT
MELODY MELODY MELODY MELODY ACCOM1 2 3 4 PANIMENT VOICE VOICE VOICE
L
R2
R1
OVERALL
MINUS ONE
3 If Necessary, Select a User Pad Set Number
If the desired user pad set is not already selected, use the [] and [+] buttons, the number buttons, or the data dial to select as required.
37 UserPad1
4 If Necessary, Select a MULTI PAD to Record
If the MULTI PAD you pressed in step 2, above, is not the one you want to record, you can select any other pad at this point simply pressing the appropriate MULTI PAD button. The selected MULTI PAD icon will appear in the display.
MUTLI PAD
1
2
3
4
ONE TOUCH SETTING
MEASURE
1
4
MULTI PAD
4
1
2
3
72
QQQQQQQQQQQQQQQ , , , , , , , , , , , , , , , QQQQQQQQQQQQQQQ , , , , , , , , , , , , , , ,
Multi Pad Recording
5 Specify Chord Match if Required
If you record a MULTI PAD with a pitched voice, the Chord Match function (see page 51) can be specified for that pad by using the SUB MENU buttons to select the Chord Match function for the corresponding pad ("Pad1Chd" . . . "Pad4Chd") while in the record standby or rehearsal mode, and then using the [+] button to turn it "On" or "Off" as you like.
· The Chord Match on/off status can be changed in the SUB MENU "MULTI PAD" even after exiting the recording mode.
on Pad1Chd
6 Record
Recording will begin as soon as you play a note on the keyboard or press the [START/STOP] button, and the BEAT indicator dots will begin to indicate the current beat as in the Auto Accompaniment mode. If you are recording a Chord Match phrase, be sure to base your phrase on a CM7 chord to ensure proper Chord Match operation. See page 67 for more details on recording around a CM7 chord.
START/STOP /
ONE TOUCH SETTING
MEASURE
· Before actually starting to record you can try playing the PSR-530 the way it is set up by using the "Rehearsal Mode": press the [SYNC START] button to temporarily disengage the record ready mode, rehearse as necessary, then press the [SYNC START] button again to return to the record ready mode. · Whenever you record a MULTI PAD, any previously recorded material in the same MULTI PAD will be erased. · If the memory becomes full while recording, "Full" will appear on the display and recording will stop (the recordready mode will be engaged).
9
ATION
MULTI PAD
7 Stop Recording
Stop recording by pressing the [START/STOP] button.
START/STOP /
8 Record Additional Pads as Required
By repeating steps 3 through 7, above, you can select and record additional pads as required.
9 Exit From the Record Mode
When you're finished recording pads, press the [RECORD] button so that its indicator goes out to exit from the record mode. The recorded user pads can now be played back in the same way as the preset pads (page 49).
73
QQQQQQQQQQQQQQQ , , , , , , , , , , , , , , , QQQQQQQQQQQQQQQ , , , , , , , , , , , , , , ,
Multi Pad Recording
Clearing MULTI PAD Data
This function makes it possible to clear unneeded data from the PSR-530 MULTI PADs.
Clearing an Entire Pad Set
While the MULTI PAD record-ready or rehearsal mode is engaged use the SUB MENU [v] and [w] buttons to select the "BankClr" function, then press the [+] (YES) button: "Sure?" will appear on the display. Press the [+] (YES) button a second time to actually clear the currently selected pad set (the preset pad sets cannot be cleared). Press [] (NO) if you want to abort the clear operation.
· "- - -: PadClr?" will be shown on the display if all the pads for the selected set are cleared.
YEs BankClr?
Sure?
7 8 9 0
Clearing Selected MULTI PADs
While the MULTI PAD record-ready or rehearsal mode is engaged use the SUB MENU [v] and [w] buttons to select the "PadClr" function. The MULTI PAD icons corresponding to pads which contain data will flash (preset pad set data cannot be cleared).
· If the pad you selected has already been cleared, "- - - : PadClr?" will appear on the display.
PadClr?
VOICE L
76
REPEAT
VOICE R2
101
MULTI PAD
REGIST MEMORY MULTI PAD
0
REVERB TRANSPOSE
116
HARMONY TEMPO
REGISTRATION
1
1
2
3
4
Use the MULTI PAD buttons to select the pad you want to clear (the icon corresponding to the selected pad will flash). Press the [+] (YES) button to actually clear the currently selected pad. Press [] (NO) if you want to abort the clear operation.
MUTLI PAD
1
2
3
4
MEASURE
1
4
MULTI PAD
1
2
3
74
QQQQQQQQQQQQQQQ , , , , , , , , , , , , , , , Using Music Cartridges QQQQQQQQQQQQQQQ , , , , , , , , , , , , , , ,
The PSR-530 features a cartridge slot which accepts pre-programmed Yamaha Music Cartridges containing style and/or song data. One sample Music Cartridge containing song data is supplied with the PSR-530. Others are available from your Yamaha dealer.
x Inserting a Music Cartridge
With the power OFF, insert the Music Cartridge into the cartridge slot as shown, and press down firmly until the Cartridge is seated properly (as shown in the illustration). [. . . ] Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo.
NORTH AMERICA
CANADA
Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311
ITALY
Yamaha Musica Italia S. P. A. , Home Keyboard Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771
ASIA
HONG KONG
Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688
SPAIN
Yamaha-Hazen Electronica Musical, S. A. Jorge Juan 30, 28001, Madrid, Spain Tel: 91-577-7270
U. S. A.
Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. [. . . ]