[. . . ] 5' Corner Style Bath Skirt Installation Instructions LEFT-HAND FIXED SKIRT RIGHT-HAND FIXED SKIRT BOTTOM RAIL REMOVABLE SKIRT The optional skirt is designed to allow the minimum service access necessary to the motor/pump and plumbing of the bath and consists of three pieces; left-hand fixed, right-hand fixed, and removable front panel, along with the necessary bottom rail and hardware for installation. [. . . ] They should be located 7/8" from the stud wall and 1/4" behind a plumb line dropped from the edge of the bath rim. Fasten the aluminum angles to the subfloor using the screws provided (See Illustration 2. ) Clean an area about 2" long, approximately 4" from each end, on the bottom of the skirt and on the skirt rail with isopropyl alcohol. Attach strips of self-adhesive Velcro® hook tape to the rail and the loop tape to the skirt, where cleaned, ensuring that the tapes will mesh properly. (See Illustration 3. ) Lift skirt up under bath at a slight angle, engaging the shell clips. Follow the same procedure for the installation of the other fixed skirt. (See Illustration 4. ) Lay the remaining skirt rail (47-1/4" long) between the fixed skirts. [. . . ] Proceed with the installation of the wall and finished flooring materials. © Copyright 1991 B244000 C 10/98 [. . . ]