[. . . ] Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Bluetooth wireless technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Get started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Keys and parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The headset complies with the Bluetooth Specification 2. 1 + EDR that supports the following profiles: Headset Profile 1. 1, Hands-Free Profile (HFP) 1. 5, and Advanced Audio Distribution Profile (A2DP) 1. 2. Check with the
6
Introduction
manufacturers of other devices to determine their compatibility with this device.
7
Get started
2.
Get started
Keys and parts
The headset contains the following parts: 1. Volume key Before using the headset, you must charge the battery and pair the headset with a compatible device. Do not place credit cards or other 8
1
3 2 6 4 5 7
Get started
magnetic storage media near the device, because information stored on them may be erased.
Chargers
This device is intended for use when supplied with power from the following chargers: AC-3 and DC-4. Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
Charge the battery
Before charging the battery, carefully read "Battery information, " p. When the battery is fully charged, the green indicator light is displayed. The fully charged battery has power for up to 7 hours of talk time, up to 150 hours of standby time, or up to 6 hours of music playing time. To check the battery charge, briefly press the multifunction key when no call is in progress. When the battery is discharged, the headset beeps about every 5 minutes.
10
Get started
Switch on or off
To switch on, press and hold the multifunction key for about 2 seconds. The headset tries to connect to the last used phone and music device, if any. To switch off, press and hold the multifunction key for about 4 seconds. The headset beeps, and the red indicator light is briefly displayed.
Pair the headset
If your phone supports the A2DP Bluetooth profile and has a music player feature, you can use the phone to make and receive calls, and to play music with the headset. Press and hold the multifunction key (for about 4 seconds) until the green indicator light starts to flash quickly.
11
Get started
3. Activate the Bluetooth feature on your phone or music player, and set it to search for Bluetooth devices. Select the headset from the list of found devices on your phone or music player. Enter the passcode 0000 to pair and connect the headset to your device. If your device does not have a keypad, it may use this passcode by default. In some devices, you may need to make the connection separately after pairing. When the headset is connected to your device and is ready for use, the green indicator light flashes slowly.
12
Basic use
3.
Basic use
Wear the headset
The headset may be provided with different sized earplugs. To change the earplug, pull the current earplug from the earpiece, and push the new earplug over the earpiece in the same position. [. . . ] Do not leave a fully charged battery connected to a charger, since overcharging may shorten its 16
Battery information
lifetime. If left unused, a fully charged battery will lose its charge over time. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Battery performance is particularly limited in temperatures well below freezing. [. . . ]