[. . . ] Important Information
Please read the following important information about your projector.
Important Safety Information
Warning: Never look into the projector lens when the lamp is switched on as the bright light can damage your eyes. Warning: Never open any covers on the projector except the lamp and filter covers. Dangerous electrical voltages inside the projector can cause severe injury. Except as specifically directed in this Owner's Manual, do not attempt to service this product yourself. [. . . ] To turn on the audio and video output, press either the A/V mute button or Esc button again. Pressing the right side of the button enlarges the image, pressing the left side of the button reduces the image. To display a portion of the enlarged image which is outside of the display area, press the Enter button to scroll the image. Use to display special effects that have been assigned in the Effect menu. Use the enter button to navigate the menus or use the remote as a mouse pointer when the projector is connected to the computer with the computer cable and the mouse cable. You can also select a menu option by pressing the center of this button (Enter). If you press the Enter when a menu or help is displayed, you access the next menu or screen. When the image source is a computer, the Enter button acts as the mouse left click. If you press the Esc button when a menu or help is displayed, you go back to the previous screen or menu. When the image source is a computer, the Esc button acts as the mouse right click. Displays the Help menu.
E-Zoom
Power Effect buttons Enter
Illumination button Esc
Menu Help
ssss
36
Button Comp S-Video Video Auto Resize P in P
Function Switches to the computer image from Computer. To set the subscreen being displayed, press in the following order : [Menu] [Setting] [P in P]. The default settings are as follows; Subscreen size:1/9 division Main screen input source:Computer Subscreen input source:Video To change the subscreen position, press the Enter button. Adjusts the volume.
Volume +/-
ssssss
Controlling the Projector
37
Using the Operation Panel
Power Help
Source
Keysto
ne
Enter button
Enter
Select
Operation Panel
You can use the operation panel to control the projector instead of the remote control. However, you can program and access the custom features only using the remote control. The following table summarizes the functions on the operation panel.
Button Power Help Source Function Turns the projector on or off. Switches the image source in order of computer Svideo composite video. If there is no S-video input, the switch toggles between computer and composite video. Scrolls up and down, or right and left when the Help menu is displayed.
Enter Keystone +/Select
ssss
38
Projector Status Indicators
The power and lamp indicators at the top of the projector tell you its operating status.
Operation Indicator Lamp Indicator Temperature Indicator
Caution: A red indicator warns you if a serious problem occurs. See Chapter 5, "Troubleshooting, " for what to do if a warning light comes on.
Operation Indicator
Displays machine condition.
Color Orange Green Green Orange Status Lit Flashing Lit Flashing Meaning Sleep mode. (The projector is plugged in, but not projecting. ) The projector is warming up. Projection lamp is off, and the projector is cooling down for one minute. [. . . ] Tucunare, 720 Tambore Barueri, Sao Paulo, SP 06460-020 Tel: (55 11) 7295-1757 Web Address: http://www. epson. com. br CHILE : Epson Chile S. A. La Concepcion 322 Providencia, Santiago Tel: (562) 236-2543 Web Address: http://www. epson. cl COLOMBIA : Epson Colombia Ltda. Diagonal 109, 15-49 Bogota, Colombia Tel: (57 1) 523-5000 Web Address: http://www. epson. com. co PERU : Epson Peru S. A. Del Parque Sur #400 San Isidro, Lima, Peru Tel: (51 1) 224-2336 Web Address: http://www. epson. com
VENEZUELA : Epson Venezuela S. A. [. . . ]