[. . . ] To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product.
SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD colour TV product, please read the following precautions carefully before using the product. [. . . ] The screen displays AV1, AV2, COMPONENT or TV mode at the upper right corner each time TV/VIDEO is pressed.
AV1 mode
I
2
DISPLAY
POWER
BRIGHT
SLEEP
MENU
TV/VIDEO
TV/VIDEO
VOL CH
Notes: AV input mode indication remains for five seconds. If both S-video terminal and normal video terminals are connected with cables, the Svideo input terminal is selected as the high priority. button.
Note: I Complete this procedure within 4 seconds, otherwise the selection will not be made.
Changing channels with the CH (
)/(
) on the remote control.
Press the CH ( ) and the channels change in the order shown below: 1 2 3 . Press the CH ( ) and the channels change in the order shown below: 3 2 1 0 99 98 . .
12
SELECTING THE MENU ITEMS
Selecting a Menu Item
· This LCD TV set allows you to adjust the picture and sound, and set the channels and other features using the On Screen Display. Select the desired menu item by following the steps below and then refer to the indicated page for details.
SLEEP TIMER menu ----------------- Page 17
SLLEP TIMER RETURN SLEEP TIMER [---REMAIN]
POWER
</>
DISPLAY BRIGHT
1 2
Press the MENU to display the MENU screen. Press the ]/[ to select the desired menu item.
· The " " mark moves up or down. · The " " mark indicates the selected menu item.
SLEEP
MENU
MENU
TV/VIDEO
]/[
VOL CH
SELECT:
ADJUST:
EXIT:
MENU
3
MPX
Press the </> to enter.
PICTURE menu (TV mode) ---------- Page 18
PICTURE (TV) RETURN CONTRAST [ 30] COLOUR [ 0] BLACK LEVEL [ 0] HASBRONESS [ 0] RED-BLUE [ 0] GREEN [ 0] RESET
-/--
MENU SLEEP TIMER PICTURE FEATURE CH-SETTING
SELECT:
ENTER:
EXIT:
MENU
SELECT:
ENTER:
EXIT:
MENU
(AV mode) --------- Page 18 Notes: I The TINT display only appears when the COLOUR SYSTEM sets N358 or N443 in the NTSC mode. I Items in purple cannot be selected.
PICTURE (AV1/AV2/CONPONENT) RETURN CONTRAST [ 30] TINT [ 0] COLOUR [ 0] BLACK LEVEL [ 0] HASBRONESS [ 0] RED-BLUE [ 0] GREEN [ 0] COLOUR SYSTEM [AUTO] RESET SELECT: ENTER: EXIT:
MENU
FEATURE menu --- Page 20
FEATURE RETURN BRIGHTNESS [BRIGHT ] AUTO POWER OFF [OFF ] UPSIDE [NORMAL ] RIGHT/LEFT [NORMAL ] AV2 IN/OUT [IN ] BLUE BACK [ON ] LANGUAGE [ENGLISH]
SELECT:
ADJUST:
EXIT:
MENU
CH-SETTING menu ---------------- Page 16
CH-SETTING RETURN POSITION COLOUR SYSTEM SOUND SYSTEM SKIP FINE NICAM IGR [CH15 ] [AUTO ] [I ] [OFF ] [783. 25MHz] [ON ] [ON ]
SELECT:
ADJUST:
EXIT:
MENU
* The screen indications shown above are larger than actual for easy reading.
13
PRESET
On-Screen Display Language Selection
Upper control panel
VOL CH MENU TV/VIDEO
I The MENU on the LCD TV set can also be used to select the language.
1
2
PRESET 1
Press the MENU on the upper part of the LCD TV set for more than two seconds to display the PRESET mode screen. Press the MENU again to change the PRESET mode as shown below.
AUTO MANUAL LANGUAGE NORMAL SCREEN
UHF 471. 25MHz
3
1, 2, 4 2
Note: I Instead pressing the MENU button more than two seconds, you can display the LANGUAGE select mode by selecting FEATURE LANGUAGE on the Menu screen.
LANGUAGE ENGLISH
3 4
Press the CH ( )/( ) to select the language you wish to display. Press the MENU to return to the normal screen.
SELECT: EXIT:
MENU
Presetting the Channels (AUTO)
VOL CH MENU TV/VIDEO
2
PRESET 1
I Automatically tunes in and presets receivable TV stations. To return the channel to its original frequency setting, follow the manual channel preset procedure. (Please see page 15 "Presetting the Channels (MANUAL)" for details. ) In AV mode, items in purple cannot be selected.
16
ADJUSTMENT
Adjusting the SLEEP TIMER Setting
POWER
SLEEP
DISPLAY
To use Direct Key function
</>
BRIGHT
1 2
SLEEP
Press the SLEEP to display SLEEP TIMER screen. Press SLEEP to set the sleep timer (in minutes).
· Each time you press SLEEP, the timer changes as follows: --30 60 90 120
MENU
MENU
TV/VIDEO
]/[
VOL CH
60
REMAIN
MPX
-/--
The setting is turned off when --- is displayed.
3
Press the MENU to return to the main screen.
To use MENU item
1
Press the MENU to display the MENU screen.
MENU SLEEP TIMER PICTURE FEATURE CH-SETTING
SELECT:
ENTER:
EXIT:
MENU
2
Press the ]/[ to move the cursor to SLEEP TIMER.
MENU SLEEP TIMER PICTURE FEATURE CH-SETTING
SELECT:
ENTER:
EXIT:
MENU
3 4
Press the </> to display SLEEP TIMER screen. The setting can be set in increment of 30 minutes and in the range between 30 and 120 minutes. The setting is turned off when --- is displayed.
SLLEP TIMER RETURN SLEEP TIMER @[120REMAIN]
SELECT:
ADJUST:
EXIT:
MENU
5
Press the MENU to return to the main screen.
17
ADJUSTMENT (Continued)
Adjusting the PICTURE Settings
POWER
</>
DISPLAY BRIGHT
1
Press the MENU to display the MENU screen.
SLEEP
MENU SLEEP TIMER PICTURE FEATURE CH-SETTING
MENU
MENU
TV/VIDEO
]/[
VOL CH
SELECT:
ENTER:
EXIT:
MENU
2
MPX
Press the ]/[ to move the cursor to PICTURE.
-/--
MENU SLEEP TIMER PICTURE FEATURE CH-SETTING
SELECT:
ENTER:
EXIT:
MENU
3
Press the </> to display the PICTURE Menu screen.
PICTURE (TV) RETURN CONTRAST [ 30] COLOUR [ 0] BLACK LEVEL [ 0] HASBRONESS [ 0] RED-BLUE [ 0] GREEN [ 0] RESET
SELECT:
ENTER:
EXIT:
MENU
4
Press the ]/[ to move the cursor and select the desired adjustment item. All of adjustment items are shown in the diagram on page 19.
PICTURE (TV) RETURN CONTRAST [ 30] COLOUR [ 0] BLACK LEVEL [ 0] HASBRONESS [ 0] RED-BLUE [ 0] GREEN [ 0] RESET
SELECT:
ENTER:
EXIT:
MENU
5
Press the </> to display the screen for the selected adjustment item.
RETURN COLOUR 0 SELECT: ADJUST: + EXIT:
MENU
6
Press the </> to make adjustment. To adjust another item, move the cursor by pressing the ]/[ button while the MENU screen is displayed.
7
Press the MENU to return to the main screen.
18
ADJUSTMENT (Continued)
Selected item CONTRAST TINT COLOUR BLACK LEVEL HASBRONESS RED-BLUE GREEN COLOUR SYSTEM (AV1/AV2) (COMPONENT) Press the <. Decrease contrast Toward purple Lower colour intensity Less bright Soft picture More red level Less green level Press the >. Increase contrast Toward green Higher colour intensity More bright Hard picture More blue level More green level
Press the > to select COLOUR SYSTEM. AUTO PAL SECAM N358 N443 PAL-M PAL-N PAL60 AUTO PAL NTSC
Notes:
I I
TINT is displayed only when N358 or N443 is selected. COLOUR SYSTEM is displayed only in the AV mode.
Switching the COLOUR SYSTEM
Set the system to AUTO for normal reception. [. . . ] I You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting an external device, use care to connect the video and audio cables to the corresponding terminals. I Do not connect antennas or headphones to AV-IN 2/OUT.
25
CONNECTING WITH EXTERNAL DEVICES (Continued)
Outputting video and audio (video output)
You can output video and audio data from the TV set through the AV output terminals (AV-OUT).
ANT.
OU T AV-IN 2/ VIDEO L AUDIO R COMP O N EN T Y PB PR L AUDIO R H EA D PH O N E R PO W E INPUT DC12V
Connect a VCR, Audio amplifier, etc.
Notes:
I I I
AV2 has 2 OUT modes (see page 21). When using the S-Video input for AV-IN 1, no video output will be made to the AV output terminal, but audio output will be made for connection to external audio systems. [. . . ]