[. . . ] P. 5 Optional Universal Adapter Plate - Parts Inventory P. 6 Assembly and mounting Instructions for the optional Universal Adapter Plate. P. 7 Adjusting height, tilt angle and rotation P. 8 Shipping and Service Instructions P. 9
INTRODUCTION
Thank you for purchasing Blue Sky International's "The Stand". "The Stand", is a fully adjustable speaker support system designed to work with nearly all manufacturers' nearfield monitors weighing up to approximately 80 lbs. , including Blue Sky's SAT 6. 5 and SAT 5 monitors. Thanks to its unique and patented leg assembly, "The Stand" is easily adjustable, without any tools, from 33. 5" to 45. 5" in 3/4" increments (from the ground to the top of the mounting plate). [. . . ] NOTE - please confirm that the black metal spacer disc is properly seated before proceeding to the next step. (see figure E and F)
Section view of base / stand assembly
IMPORTANT: Prior to mounting any speaker to the stand, confirm that the stand is on solid and stable ground. Also, confirm that "The Stand" has been assembled properly, that the bracket is locked in place and that all parts are secure. Additionally, we highly recommend that a second person is available to help mount the speaker to the stand. This person can help to stabilize the stand, and the speaker until it is securely attached. This will minimize any chance of damage or injury.
P. 5
IMPORTANT: These instructions detail the assembly of "The Stand" and the mounting of Blue Sky Internationals' SAT 5 and SAT 6. 5, or the mounting of any speaker with an OmniMount Type 30 or 60 mounting pattern. The weight of any speaker being mounted using these instructions and the above mentioned mounting pattern, should not exceed 60 pounds. For speakers over 60 pounds, please see the instructions on page 5.
G
Main bracket assembly bolt (10 mm) Angle locking bolt (8 mm) Thumb Screw
Blue Sky SAT 6. 5 & SAT 5 / compatible speaker mounting instructions
Instructions for monitors with OmniMount Type 30 and Type 60 mounting patterns on the bottom. Confirm that both of the "main bracket assembly bolts" are firmly in place and fully tightened (see figure G).
H I
1
2. Align the top of the bracket so that it is level and then tighten both of the Angle Locking Bolts so that the bracket doesn't move in the vertical plane (see figure G). Confirm that the thumb screw is tightened and that the entire bracket assembly is fastened properly to the main leg assembly (see figure G). Note: A speaker attached to The Stand can either be angled up or down vertically depending on how its mounted to the bracket. Confirm that you are mounting the speaker so that it works best for your application (see page 7 for more information). With the help of an assistant, carefully place the speaker on top of the stand and have the assistant support the speaker until it is firmly attached to the stand. Center the speaker and align the insert holes on the bottom of the speaker with the holes on the bracket. Make sure to use the correct screws for the inserts on the bottom of your speakers (page 3 Parts List). Insert the screws through the hole in the bracket and into the inserts on the bottom of the speaker. Thread the screws into the inserts, being careful not to cross thread the screws. Tighten down the screws in a crisscross pattern until the screws are firmly seated. The stand is now fully assembled, see section Page 7 for details on how to adjust height, tilt angle or rotation.
Detail of 1
P. 6
J
1
OPTIONAL UNIVERSAL ADAPTER PLATE PARTS LIST
Below you will find a list of items included with Blue Sky's "The Stand". "The Stand" ships in two boxes, one which includes these instructions, the leg assembly and the screws, the second box includes the base. The optional universal adapter plate ships in a separate box.
2
K
Figure J: Screws 1. [. . . ] First, place one foot on the base of the stand, then lift up on the bracket / monitor assembly until you have reached the desired height. boxes), daytime phone number, RA number, and a detailed description of the problem, including how it can be duplicated Write the RA number on the top of the carton. Blue Sky International ATTN: SERVICE DEPT / RA# 70 Sea Lane Farmingdale, NY 11735 USA 7. Turnaround time is three to five business days depending on the problem. [. . . ]