[. . . ] Furthermore, you can also see the expected temperatures and the precipitation probability for the whole day in %. These weather forecasts are broadcast via the time signal transmitters HBG in Switzerland and DCF77 in Germany. The Meteotime device broadcasts the weather forecasts for a particular location and day once a day. [. . . ] 14:-- if the current time is 14:38) The value can be changed with the keys / . In order to adjust the time zone for England, for instance (England = ­1 hour), the key is pressed once. In the example above, 14:-- thus becomes a 13:-Note: If a time zone is entered that deviates by more than -+3 hours from the time received, the synchronisation and the weather forecast reception will be deactivated. Language setting The language selection of the display of the day in 3 letters is: D: German (basic setting) GB: English F: French NL: Dutch I: Italian E: Spanish The language can be changed with the keys /. Snooze time The alarm clock has a SNOOZE function (slumber function or wake-up call repeat after x minutes if the SNOOZE key is pressed during the acoustic wake-up signal. Key for at least 3 seconds until the normal display ap- The Mete-On 3 can display weather information of up to 60 regions in Europe. You will find a pre-programmed selection of towns and cities in these regions in the device. Another location can be set as follows: Press and hold (3 seconds) the key The following settings can be made to the respective flashing segment. Country Sixteen countries are available (the pre-programmed list of towns and cities in the Mete-On 3 is attached at the end of these instructions). Each location is displayed with a 4-letter abbreviation (see list at the end of these instructions). The appropriate location in the selected country can be selected with the keys /. Each time the key is pressed like this, the following info will be displayed sequentially: - Running seconds (basic setting) - Date (`DATE') in the format date/month - Day of the week (according to the language selected, see Chapter 5. 1) - Selected location (`CITY') - Precipitation probability (`RAIN') in % (if no data are yet available, dashes appear before the % sign) Weather and temperature forecasts The forecasts and the temperature measured in the device are displayed here. You can switch between the potential displays with the keys 8 and Alternating of the display between the weather forecast DAY (, DAY`) and night (, NIGHT`) Switching between the temperature forecast (`FORECAST') for the period (day/ night) selected with the key above and the room temperature (`INDOOR'). Temperatures are displayed in °C In addition to this manual selection, an integrated logic system will add the valid forecast to the display at specified times: 03:00 The forecast day (`DAY') is added to the display 18:00 The forecast night (`NIGHT') is added to the display Note: If weather data is not yet available, dashes appear in the display of the forecast temperature (`FORECAST'). The weather forecast is displayed using the 15 different pictograms listed here. New forecasts are made on a daily basis by professional meteorologists in the Meteotime network. Forecast reliability is therefore based at all times on state-of-the-art technology and the most up-to-date weather models available Forecast of weather situations that require special attention The wake-up call function is operated via the following keys: Short press once: The wake-up time flashes and can now be set via the keys / eingestellt werden. [. . . ] During reception of the relevant data at night, at least 75% of the data must be received well. there is interference to the reception at the place of installation of the Mete-On 3. Use the , TEST` function from the instructions for use to find a more favourable place of installation. [. . . ]