[. . . ] Keep children from dropping or pushing objects into the display's cabinet openings. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. A1
Important Precautions On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. [. . . ] Connection : No need Audio cable HDMI signal includes audio data .
Audio cable
:
1
2
3
4
Audio out
A8
Control Panel Functions Front Panel Controls
4 : 3 in Wide Button
Resolution 1280x1024 1152x864 1024x768 800x600 640x480 720x480 Screen ratio 5:4 4:3 4:3 4:3 4:3 3:2
It allows you to adjust the size of screen you are watching now.
· WIDE : The video source is displayed in full screen size. · 4 : 3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. (The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3. ) The input signal which the 4:3 IN WIDE does not support the '4:3' is the following. - 720 x 400, 1280 x 768, 1360 x 768, 1440 x 900, 1680 x 1050, 1920 x 1080
4 : 3 IN WIDE WIDE
4 : 3 IN WIDE 4:3
WIDE mode
4 : 3 display mode
MENU Button
Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
A9
Control Panel Functions
Buttons
Use these buttons to select or adjust functions in the On Screen Display. buttons to decrease or increase the speaker
Button
(VOLUME)
Button
(SOURCE)
Use this button to make RGB, DVI or HDMI connector active. *HDMI is optimized on the AV equipment.
INPUT RGB DVI HDMI
AUTO/SET Button
Use this button to enter a selection in the On Screen Display.
AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is W2442PA : 1920 x 1080
Power Button
Use this button to turn the display on or off. This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber.
Power Indicator
A10
On Screen Display (OSD) Control Adjustment Screen Adjustment
Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
MENU
AUTO/SET
MENU
Press the MENU Button, then the main menu of the OSD appears. Set your own blue color levels.
RED GREEN MENU : Exit BLUE : Decrease : Increase SET : Select another sub-menu
A14
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
POSITION
POSITION
HORIZONTAL VERTICAL
To move image left and right. To move image up and down.
MENU : Exit : Decrease : Increase SET : Select another sub-menu
USER
USER
You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different environment.
. . . . . . RCM(Real Color Management): Selects the color mode.
0
MENU : Exit : Decrease : Increase SET : Select another sub-menu
1 2 3
Not applied Green enhance Flesh tone Color Enhance
Select the sub-menu using the AUTO/SET button and save the YES value using the , buttons.
A15
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
MOVIE
MOVIE
This is for animation images in videos or movies.
INTERNET
INTERNET This is for text images (Word processing etc). GAME (only for HDMI input)
NORMAL
NORMAL
This is under normal operating conditions. (only for RGB/DVI input)
STANDARD This is under standard operating conditions. (only for HDMI input)
DEMO
DEMO
SPORTS
This is just for advertising to customer in the shops. [. . . ] · Set the color setting higher than 24 bits (true color) at Control Panel - Settings.
G The screen blinks.
· Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
Have you installed the display driver?
G Have you installed the display driver?· Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www. lge. com. · Make sure to check if the video card supports Plug&Play function.
G Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
A21
Specifications
Display
W2442PA
24 inches (60. 9 cm) Flat Panel Active matrix-TFT LCD, AntiGlare coating Visible diagonal size: 60. 9 cm 0. 276*0. 276 mm pixel pitch Horizontal Freq. [. . . ]