[. . . ] JBL® PERFORMANCETM SERIES AV2 AUDIO/VIDEO PROCESSOR USER GUIDE IMPORTANT SAFETY INSTRUCTIONS 1. Do not install near any sources such as radiators, heat registers, stoves or other apparatus that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] When the speaker configuration is set for 7. 1-channel operation, playback of a DTS-encoded program source will automatically trigger the selection of one of the two DTS-ES modes. Newer discs with special DTS-ES Discrete-encoding will be decoded to provide six discrete, full-bandwidth channels, plus a separate low-frequency effects channel. All other DTS discs will be decoded using the DTS-ES Matrix mode, which creates a 6. 1-channel sound field from the original 5. 1-channel soundtrack. Dolby Digital Dolby Digital EX Dolby Pro Logic II Film Music Game Pro Logic Dolby Pro Logic IIx Film Music Game Dolby Virtual Speaker Reference Wide DTS 5. 1 DTS-ES 6. 1 Matrix DTS-ES 6. 1 Discrete 3-27 Setup DTS Neo:6 Cinema DTS Neo:6 Music Harman Consumer Group, Inc. These two modes are available when any analog source is playing to create a three-channel, five-channel, or six-channel surround presentation from conventional matrix-encoded and traditional Stereo sources. Select the Cinema version of the DTS Neo:6® mode when a program with any type of matrix surround encoding is present. Select the Music version of the DTS Neo:6 mode for optimal processing when a nonencoded, two-channel stereo program is being played. The DTS Neo:6 mode is designed for use with matrix-encoded digital signals. This mode is available when Digital DTS 96/24TM, DTS 5. 1 and DTS 20-bit 5. 1 CH CD data streams are active. The DTS Neo:6 mode derives six channels when both side and rear speakers are present (rear speakers will be in parallel). The DTS 96/24 mode is available on specially-encoded (and labeled) optical discs that offer five channels of audio with a 96kHz sampling rate that delivers greatly improved audio performance. When a DTS 96/24 disc is in use and the player is connected with a digital link, the mode is selected automatically. The Hall modes, for both 5-channel and 7-channel systems, create sound fields that resemble a small- (Hall 1) or medium-sized (Hall 2) concert hall. This mode takes advantage of multiple speakers to place a stereo signal at both the front and back of a room. Ideal for playing music in situations such as a party, it places the same signal at the front-left and surround-left, and front-right and surround-right speakers. The center channel is fed a summed mono mix of the in-phase material of the left and right channels. If the AV2 has been configured for 6. 1-/7. 1-channel operation, both of these options are available for selection. If the AV2 has been configured for 5. 1-channel operation, only the 5-Channel Stereo option is available. This mode turns off all surround processing and presents pure left- and right-channel stereo programs. The bass management processing that routes low frequencies to the subwoofers is still active. This mode turns off all surround processing and presents pure left- and right-channel stereo programs. The bass management processing that routes low frequencies to the subwoofers is still active. This mode does not allow any user modification of the audio, such as bass or treble adjustments. Note: This mode is only available when the Tone Controls are set to OFF. DTS Neo:6 DTS 96/24 Hall 1 and Hall 2 5-Channel Stereo 7-Channel Stereo 2-Channel Stereo 2-Channel Stereo Bypass 3-28 JBL® PerformanceTM Series AV2 Audio/Video Processor Setup DTS AND DOLBY STATUS DISPLAYS The upper right-hand corner of the front panel two-line display may indicate status information regarding the incoming source. [. . . ] Note: Restoring the Factory Default Settings will ERASE all customized features, including renamed components, learned buttons and macros. On the remote control, press and hold the Main and Stop buttons at the same time. The bottom of the touchscreen flashes "WARNING!" NOTE: You now have three seconds to perform the next step. If a button is not pressed within three seconds, the RESET heading will revert to MAIN, indicating that the remote control is no longer in Reset mode. [. . . ]