[. . . ] SAM12X PASSIVE CROSSOVER DIAGRAM FOR SAM1HF/SAM2LF SPEAKER MODULES CONNECTION INSTALLATION NOTES: · Install the SAM12x as close to the SAM speaker modules as possible. [. . . ] Connect the positive and negative speaker-level outputs of the amplifier to the speaker terminal inputs marked IN+ and IN­. Connect the TW+ and TW­ outputs to the positive and negative terminals on the SAM1HF. Connect the first set of W+ and W­ outputs to the positive and negative terminals on the SAM2LF. Connect the second set of W+ and W­ outputs to a second SAM2LF only if you are using multiple SAM2LF modules. Using the selector knob on the side of the SAM12x, select the configuration you are using. Configuration 1 Configuration 2 Configuration 3 IN+ IN ­ W+ W ­ W+ W­ TW+ TW­ Declaration of Conformity + To amplifier ­ speaker outputs + ­+­ To woofer To woofer +­ To tweeter We, Harman Consumer Group, Inc. 2, route de Tours 72500 Château du Loir France declare in own responsibility that the product described in this owner's manual is in compliance with technical standards: EN 61000-6-3:2001 EN 61000-6-1:2001 Conf. [. . . ] JBL and JBL Synthesis are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. [. . . ]