[. . . ] The High or Medium resolution monitor will not work for TURKEY HUNTING USA.
MIS-CONNECTING THE GUN CONNECTOR
When you connect the Gun unit to Main PCB, you must make sure and connect to the correct connectors which are CN 5 and CN 6 connectors.
If you connect Gun unit to CN 2, 8 pin connector, your PCB will sustain serious damage.
CAUTION!!NEVER CONNECT GUN UNIT TO CN2.
10 pin connector from GUN unit
CN 5
CN 6
1
1. KIT PACKAGE CONTENTS
A Main P. C. Board 43-10-001 B Push Button Assy 43-50-013
C
Instruction Decal Sheet 43-30-210
D
"PUMP BEFORE SHOOTING" Decal 43-30-224
F E Marquee Styrene 43-30-100
Control Overlay 43-30-150
G
Side Decal (2 sheet) 43-30-200
2
I
Gun Assy 99-50-310
H
Gun Holster 43-50-303
J
Conversion Kit Instructions 43-30-300
K
AAMA Sticker 99-30-750
ANIMATED VIOLENCE MILD
CONVERSION KIT INSTRUCTIONS
3
2. [. . . ] Press START button to go back to Main menu.
X
PRESS START BUTTON TO EXIT
9
2. The color blocks in the center should be four bands (Red, Green, Blue and White from top to bottom), each with a color scale from dark to bright, left to right. If the screen does not match this description, adjust the Monitor as described in the Monitor's manual. * Press the START button to exit and go back to the TEST MENU screen.
COLOR TEST RED GREEN BLUE WHITE
PRESS START BUTTON TO EXIT
3. Check following: - The grid line should be straight, and the lines should not have excessive pincushion or barrel distortion. - "Out"line of grid line is the same size as "Out"line of game screen. So, "Out" line should be able to be seen with no overflow of grid lines on screen. If these are not as above, adjust the Monitor as described in the Monitor's manual. * You can exit and go back to the TEST MENU screen by press START button.
CROSS HATCH
PRESS START BUTTON TO EXIT
4. To check the functioning of each switch, activate it and watch the corresponding OFF letters change to ON. If the ON and OFF letters do not appear correctly, check the Harness connections and Switches. * Press START button and Gun trigger simultaneously to exit.
I/O TEST
START PUMP TRIGGER SERVICE COIN A COIN B TEST : : : : : : : OFF OFF OFF OFF OFF OFF OFF
PRESS START & GUN TRIGGER TO EXIT
5. You can check each sound in this game.
SOUND TEST
SOUND CODE 000 RIFLE 1 FORWARD : PLAY : START GUN
* Press START button and Gun trigger simultaneously to exit.
PRESS START & GUN TRIGGER TO EXIT
10
6. MEMORY TEST
Use this screen to check RAM and ROM on the Main P. C. B. [. . . ] Plus, monitors tend to develop a magnetic field from continuous use, which would cause the gun unit not to function properly. Therefore, it is recommended that the monitor is demagnetized [Degaussed] every so often in order to keep the gun unit functioning properly. In addition, the following conditions of the monitor may result in Gun shooting problems:
? [. . . ]