[. . . ] C INSTALLATION INSTRUCTIONS Universal Headrest Mount for VMA6491/VMA7191 HRM100 The HRM100 is engineered to be installed into factory headrests while retaining the factory cosmetics. [. . . ] Note: Carefully remove the foam and locate the metal headrest supports. Carefully cut an access hole for the video and power cables on the bottom of the headrest. Locate the metal headrest supports and insert the tie straps around the metal supports on all four corners. Once all tie straps are through the bezel, gently adjust tie straps one at time until headrest bezel is secured onto the headrest. Carefully run the video and power connections up the seat back and make an access hole on the top portion of the seatback. Run the video and power cables from seatback opening into the headrest wiring opening. Connect the video and power connections from the bezel to the monitor. Test the monitor for functionality before proceeding to the next step. [. . . ] Important Note HRM100 is intended for rear passenger entertainment only. ÓClarion Corporation of America, Gardena, CA [. . . ]