[. . . ] Crestron C2N-TTVFM TV & FM Radio Tuner Operations Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON
All brand names, product names, and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
Crestron C2N-TTVFM
TV & FM Radio Tuner
Contents
TV & FM Radio Tuner: C2N-TTVFM 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Users can save a preset by setting this input high and selecting the desired FM preset number where the current station will be stored. High/1 (constant level) = Save preset; Low/0 = No effect
Input: <FM_Mono>
Sets the FM audio to mono when high. High/1 = Set FM to mono; Low/0 = Set FM to stereo
Output: <FM_Mono-F>
Indicates that the FM tuner is in the mono state. The tuner will go into the mono state whenever the <FM_Mono> input is high. High/1 = In FM mono mode; Low/0 = In FM stereo
Inputs: <FM_Search+>, <FM_Search->
Searches in the up (+) or down (-) direction for FM stations, for as long as the signal is high. Users can search for stations by pressing remote search buttons defined on a touchpanel or other interface. (The TV/FM Tuner does not provide local search buttons. ) The Search function will continue until: 1) 2) 3) 4) 5) the remote search button is released; or it wraps around to the original station; or after maximum repeats; or a station is directly entered; or a remote scan +/- or station +/- button defined on a touchpanel or other interface is pressed.
High/1 = Search up or down (search button pressed); Low/0 = Stop search (search button released) Output: <FM_Sensitivity-F> Indicates the FM sensitivity setting. The FM sensitivity will be set to High sensitivity whenever the FM signal level is too weak after tuning. (This will cause the tuner to switch to High sensitivity mode automatically. ) High/1 = Sensitivity is set to High; Low/0 = Sensitivity is set to Normal
Operations Guide - DOC. 6266A
TV & FM Radio Tuner: C2N-TTVFM · 19
TV & FM Radio Tuner
Crestron C2N-TTVFM
C2N-TTVFM FM Tuner Controls Analog Input and Output Signals
C2N-TTVFM FM Tuner Controls Analog Input and Output Signal Descriptions SIGNAL TYPE AND NAME
Input: <FM/TV_Hphone_Vol>
DESCRIPTION
Sets the FM/TV headphone volume level from 0% to 100%. Note that this input can be used in addition to or instead of the digital inputs for volume. In US mode, valid analog values range from 8800d (for 88. 00MHz) to 10800d (for 108. 00MHz). In European mode, valid analog values range from 8750d (for 87. 50MHz) to 10800d (for 108. 00MHz). Values above and below the maximum and minimum values will hold at the min/max frequencies.
Output: <FM/TV_Hphone_Vol-F> Input: <FM_Freq>
Output: <FM_Freq-F> Input: <FM_Presets>
Indicates the current FM station frequency. When the <FM_Save_Preset> input is high, the tuner saves the selected preset. When <FM_Save_Preset> is low, the tuner plays the selected preset. Valid analog values range from 0d (for Preset 1) to 19d (for Preset 20). No other values are valid.
Outputs: <FM_Preset1> through <FM_Preset20>
Indicates the frequency of the corresponding preset. For example, if Preset 4 is FM station 88. 3, then <FM_Preset4> will equal 8830d. The analog values will differ depending on whether the tuner is set to US or European mode (refer to the <FM_Freq> input described earlier).
20 · TV & FM Radio Tuner: C2N-TTVFM
Operations Guide - DOC. 6266A
Crestron C2N-TTVFM
TV & FM Radio Tuner
C2N-TTVFM Slot 02, TV Tuner Controls Digital Input and Output Signals
Operations Guide - DOC. 6266A
TV & FM Radio Tuner: C2N-TTVFM · 21
TV & FM Radio Tuner
Crestron C2N-TTVFM
C2N-TTVFM TV Tuner Controls Digital Input and Output Signal Descriptions SIGNAL TYPE AND NAME
Inputs: <TV_Scan+>, <TV_Scan->
DESCRIPTION
Scans through TV stations on the rising edge of the input. [. . . ] To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ]