[. . . ] Changing Your Crosskate 616 BackcountryTM Steering Springs Please refer to the Owner's Manual that came with your skates for other important mechanical, safety, and user information. The PowerCarve TM system utilizes two springs of different strengths. [. . . ] Step 2: Pry off the Steering Spring Cover (9) with a flathead screwdriver, and remove the existing Steering Springs and Steering Stop Pin Cap (10). Step 4: Reinstall the springs and cap into the PowerCarve Housing (4). Refer to the diagram to ensure that the stronger spring is on the correct side for the left and right skates. Step 5: Replace the Steering Spring Cover (9), and reinstall the PowerCarve Housing (4) back onto the skate. Ensure that Steering Stop Pin (3) goes into the Stop Pin Cap (10) when you reinstall the assembly. your weaker stronger 2 4 9 3 Left Side Housing Shown 10 CROSSK SKA CROSSKATE Crosskate Inc. 13R Bessom St. [. . . ] 01945 1. 877. CROSSK8 Please refer to the Owner's Manual for the full Crosskate Limited Warranty. [. . . ]