[. . . ] ENGLISH
CONTENTS
SAFETY FIRST 2 4 7
VIDEO CASSETTE RECORDER
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INDEX INSTALLING YOUR NEW RECORDER INITIAL SETTINGS
Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
8
Auto Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Preset Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SAT CONTROL SET T-V LINK
Satellite Receiver Control Setting . . . . . . . . 13 T-V Link Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13
15
PLAYBACK RECORDING
16 20
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 B. E. S. T. Picture System . . . . . . . . . . . . . . . . . . . . . . . 23 SHOWVIEW® Timer Programming . . . . . . . . 24 Express Timer Programming . . . . . . . . . . . . . . . . 26 Automatic Satellite Programme Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TIMER RECORDING
24
EDITING
Edit From A Camcorder . . . . . . . . . . . . . . . . . . . . . . 31 Edit To Or From Another Video Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
31
SYSTEM CONNECTIONS
PR
VCR SAT REVIEW
SAT
Connecting To A Satellite Receiver . . . . . 33 Connecting/Using A Decoder . . . . . . . . . . . . . 34 Connecting/Using A Stereo System . . . . . 35
33
The recorder illustrations appearing in this instruction manual are of HR-J680EU.
SUBSIDIARY SETTINGS
36
Mode Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Tuner Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Video Channel Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 SHOWVIEW® System Setup . . . . . . . . . . . . . . . . . . 47 Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
TROUBLESHOOTING QUESTIONS AND ANSWERS SPECIFICATIONS LIST OF TERMS
50 53 54 55
LPT0482-001A
EN
2 EN
SAFETY FIRST
Safety Precautions
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION
8 When you are not using the recorder for a long period of time, it is recommended that you disconnect
the power cord from the mains outlet.
8 Dangerous voltage inside. To prevent electric
shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.
WARNING
There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East). [. . . ] F Return to the timer mode.
Press # (TIMER).
You can change "TV PROG" to "SAT" for the channel position by pressing the NUMBER key "0".
Press " as many times as necessary. If there are still some programmes remaining, go on to step 6.
Check, cancel and change programmes
A Disengage the timer mode.
Press # (TIMER), then press 1. Press ".
B Access the Programme Check screen.
EN
29
When programmes overlap each other
If "PROGRAM OVERLAPPED" appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.
Example: Programme 1 (you have just made) and Programme 4 overlap each other.
A Confirm the overlapping programmes. B Select the programme to modify.
Press rt, then press OK or e.
Overlapping programmes blink on the TV screen.
You can only select one of the overlapping programmes.
NOTE:
If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the recorder will return to the normal screen.
To cancel a programme, press & when the Programme screen you do not want is shown. "PROGRAM COMPLETED" appears on the TV screen for about 5 seconds, then the normal screen appears. To change a programme, press the appropriate button: START+/, STOP+/, DATE+/, PR+/, VPS/PDC and/or SP/LP (p) when the Programme screen on which you want to make changes is shown, then press OK. "PROGRAM COMPLETED" appears on the TV screen for about 5 seconds, then the normal screen appears.
C Cancel or change programme setting.
NOTE:
If the overlap is not yet solved, or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Programme Check screen again. Repeat the above steps again until the overlap is solved.
30 EN
TIMER RECORDING (cont. ) ATTENTION
Be sure not to turn on the satellite receiver before the programme is executed; otherwise, the recorder will start recording when the satellite receiver's power is turned on. If you have connected another appliance other than a satellite receiver to the AV2 (L-2) IN/DECODER connector, be sure not to engage the Auto Satellite Programme Recording mode; otherwise, the recorder will start recording when the connected appliance's power is turned on. Auto Satellite Programme Recording and timer-recording cannot be done at the same time.
Automatic Satellite Programme Recording
This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder and programme the timer on the satellite receiver. The recorder starts or stops recording by the signals input from the satellite receiver. After recording, the recorder's power shuts off automatically.
Make sure the satellite receiver is connected to the recorder's AV2 (L-2) IN/DECODER connector. Insert a cassette with the safety tab in place.
Before performing the following steps:
A Select the L-2 SELECT mode.
Set "L-2 SELECT" to "A/V" or "SAT" (
When you select "SAT", refer to "IMPORTANT" on page 33.
pg. 39).
B Set the tape speed.
Press SP/LP (p).
VCR SAT REVIEW
SAT# indicator
Auto C Engage themode. Satellite Programme Recording
Press and hold SAT# for about 2 seconds. The SAT# indicator lights up and the recorder turns off automatically.
NOTES:
To disengage the Auto Satellite Programme Recording mode, press SAT#. If the recorder's power is off, it is not possible to engage the Auto Satellite Programme Recording mode. In step 3, if the SAT# indicator does not light but instead blinks quickly even though your satellite receiver's power is off, Auto Satellite Programme Recording will not work properly with that satellite receiver*. [. . . ] The video recorder goes to its Stop mode automatically after 5 minutes to protect the heads. The video recorder automatically rewinds it to the beginning.
54 EN
GENERAL
Power requirement : AC 220 V 240 Vd, 50 Hz/60 Hz Power consumption Power on : 16 W Power off : 4. 0 W Temperature Operating : 5°C to 40°C Storage : 20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) [HR-J680/681/682EU] : 400 mm x 94 mm x 278 mm [HR-J587/588/589EU] : 360 mm x 94 mm x 278 mm Weight [HR-J680/681/682EU] : 3. 3 kg [HR-J587/588/589EU] : 3. 2 kg Format : VHS PAL standard Maximum recording time (SP) : 240 min. with E-240 video cassette
SPECIFICATIONS
TUNER/TIMER
TV channel storage capacity : 99 positions (+AUX position) Tuning system : Frequency synthesized tuner Channel coverage : VHF 47MHz 89MHz/ 104MHz 300MHz/ 302MHz 470MHz UHF 470MHz 862MHz Aerial output : UHF channels 22 69 (Adjustable) Memory backup time : Approx. 10 min.
ACCESSORIES
Provided accessories : RF cable, Infrared remote control unit, "R6" battery x 2 Optional accessories : Satellite Controller RM-SD1
Specifications shown are for SP mode unless otherwise specified. [. . . ]