[. . . ] it may present a choking or suffocation hazard (see Precautions and tips).  The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals. built-in appliance Use a suitable cabinet to ensure that the appliance functions properly. [. . . ] Alternatively, leave at room temperature for approximately 1 hour (until the dough has doubled in volume). • Break up the dough, kneading gently, and divide it to create several loaves. • Place them on a sheet of baking paper (cut to the same size as the inside of the dripping pan) on top of the rack (or on 2 or 3 racks if you wish to cook the loaves 4. Once the pre-heating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds. During cooking it is always possible to: - Change the cooking function by turning the SMALL SPACE FUNCTION knob. - Stop cooking by turning the SMALL SPACE FUNCTION knob to the “0” position. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. Programmed cooking 8 modes which have not started will not be restored and must be reprogrammed. cooking functions GRILL function The top heating element is activated. By turning the TEMPERATURE knob, the different power levels which may be set will appear on the display; these range between 5% and 100%. The high and direct temperature of the grill is recommended for food which requires a high surface temperature. During cooking it is always possible to: - Change the temperature by turning the TEMPERATURE knob. - Stop cooking by turning the MAIN SPACE FUNCTION knob to the “0” position. Once the pre-heating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds. The digits on the display become brighter to indicate which recess you are adjusting. The Small Space and Main Space settings may actually be changed during simultaneous cooking: - Change the cooking function by turning the SMALL SPACE FUNCTION and/or MAIN SPACE FUNCTION knob. - Stop cooking by turning the SMALL SPACE FUNCTION and/or MAIN SPACE FUNCTION knob to the “0” position. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed. Next, press the button until the icon and the three numerical digits on the DISPLAY begin to flash. Press the button again so that the other two numerical digits on the DISPLAY begin to flash. Turn the TIMER KNOB towards “+” and “-” to adjust the minute value. [. . . ] Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack. Use a screwdriver to lift up and turn the small levers F located on the two hinges (see diagram). Grip the door on the two outer sides and close it approximately half way. [. . . ]