[. . . ] MR-8 supplementary manual for Version 1. 11 With the software upgrade to V1. 11, the operation for "Erase Track" and "Erase Part" has partly changed, as well as the "Auto Delete" menu item has been added to the System menu in the menu mode. [. . . ] You can confirm the result by checking the remaining time after executing erasing. However, by setting the "Auto Delete" menu item (which is newly added to the System menu of the menu mode with Version 1. 11) to "Off", you can make the "Erase Track" or "Erase Part" operation undoable. Sure?" message is not shown on the display and you can execute erasing by following the procedure described in the owner's manual. See the back page for details about how to set the "Auto Delete" item. <Note>: If you set "Auto Delete" to "Off" and execute "Erase Track" or "Erase Part", the remaining (recordable) space on the memory card does not increase. How to set "Auto Delete" By default, the "Auto Delete" menu item which is newly added to the System menu is set to "On". As described on the other page, if you execute "Erase Track" or "Erase Part" in this condition, the corresponding WAV file is completely deleted and you cannot undo erasing (while the remaining space of the memory card increases). Therefore, if you want to make the "Erase Track" or "Erase Part" operation undoable, you have to change the setting of "Auto Delete" to "Off". [. . . ] See page 61 of the owner's manual for details about "Delete Unused". © PRINTED IN JAPAN JUNE 2004 8588 057 000 FX (406658) [. . . ]