[. . . ] To do that rightclick on the file you have downloaded and select Extract All. . . Note: in the screenshots below the names of the files/folders are just examples, they will be different in your case. Step 2. [. . . ] Please make sure you are not selecting the original compressed (zipped) file. Note: in the screenshots below the names of the files/folders are just examples, they will be different in your case. Step 8. If you get the publisher verification message, click on "Install this driver software anyway". The driver installation is now completed. See the "How to connect to a Wireless Network" section below. How to install drivers in Windows Vista Page 4 of 8 How to update driver. If the driver for the adapter has not been installed correctly you can re-install it by selecting the "Update Driver" option in Device Manager. Here is how to do it: Leave the adapter connected to your computer (applies to USB adapters). Click on Start button, then right-click on "Computer" and select Manage. Select Device Manager on the left and then look for "Unknown Device" in the right panel. Right-click on the "Unknown Device" and select Update Driver Software. . . Continue with installation using the steps above (from Step 6 onwards). How to install drivers in Windows Vista Page 5 of 8 How to connect to a Wireless Network Click on the Start button and then on "Connect To". You will see a list of available wireless networks in your area. Highlight the network you want to connect to (you can set the name of your wireless network (SSID) on your wireless access point or router). [. . . ] Click on Manage wireless networks. Right-click on the network you want to remove and select "Remove network". Then reconnect to the network using the new settings. How to install drivers in Windows Vista Page 8 of 8 [. . . ]