[. . . ] If you should lose the fuse cover, please contact your nearest Sony service station.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
Trademark information
· is a registered trademark of the DVB Project · HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
About the model name in this manual
The "xx" that appears on the model name, corresponds to two numeric digits related to design or colour variation.
FUSE
FUSE
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product.
Introduction
Thank you for choosing this Sony product. [. . . ] Connect to the HDMI IN 2 socket, to view photographs or screen images from a PC or digital video camera.
f. )
For a USB device See page 21.
Symbol on the screen Description
AV1/ AV1 AV2/ AV2 PC
AV1/ To see the equipment connected to D. z
· It is recommended to use a PC cable with ferrites like the "Connector, D-sub 15" (ref. 1793-504-11, available in Sony Service Centre), or equivalent.
Component
To see the equipment connected to A.
For KDL-32S55xx/KDL-32P35xx/KDL-26S55xx
HDMI1, HDMI2 or HDMI3 HDMI IN 1, HDMI IN 2 or HDMI IN 3 To see the equipment connected to B, C or J. Digital video and audio signals are input from the connected equipment. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 2 socket through a DVIHDMI adaptor interface (not supplied), and connect the equipment's audio out sockets to the audio in sockets in the HDMI IN 2 sockets. Connect to the HDMI IN 3 socket, to view photographs or screen images from a PC or digital video camera.
USB
To see the equipment connected to I. To view photographs or listen to the music on USB storage media connected to the TV. When connecting mono equipment, connect to the AV3 L socket.
AV3
~
· Be sure to use only an authorised HDMI cable bearing the HDMI logo. · When HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 22 to set up this communication.
20 GB
To connect
Conditional Access Module (CAM) H
Do this
To use Pay Per View services. When you do not use the CAM, we recommend that the "dummy" card be inserted and kept in the CAM slot. 2 Press F/f/G/g to select an option or adjust a setting, then press .
For details about settings, see page 24 to 30. ~
· The options you can adjust vary depending on the situation. * This function may not be available in some countries/regions.
GUIDE
2
RETURN TOOLS
MENU
1
Using MENU Functions
1 2
Press MENU. Press F/f to select an option, then press .
To exit the menu, press MENU.
MENU Digital Favourites Analogue Digital Digital EPG External Inputs Photo / Music Settings
Select:
Enter:
Exit:
1 Digital Favourites*
Displays the Favourite list (page 17).
2 Analogue
Returns to the last viewed analogue channel.
3 Digital*
Returns to the last viewed digital channel.
4 Digital EPG*
Displays the Digital Electronic Programme Guide (EPG) (page 16).
23 GB
Settings
Picture Adjustment
Picture Mode
Selects the picture mode except for PC input source. Increases or decreases the green tones and red tones.
z · "Hue" can only be adjusted for an NTSC colour signal (e. g. , U. S. A. video tapes).
Display Mode (only in PC mode)
Backlight Contrast Brightness Colour Hue
Sharpness
Sharpens or softens the picture.
Colour Tone
Adjusts the whiteness of the picture. "Warm": Gives the white colours a red tint.
z · "Warm" can not be selected when you set "Picture Mode" to "Vivid".
Noise Reduction
Reduces the picture noise (snowy picture) in a weak broadcast signal. "High/Medium/Low": Modifies the effect of the noise reduction. Reduces the picture noise in MPEG-compressed video.
MPEG Noise Reduction
24 GB
Reset
Resets all "Picture Adjustment" settings except "Picture Mode" and "Display Mode" (only in PC mode) to the factory settings.
~
· "Brightness", "Colour", "Hue" and "Sharpness" are not available when "Picture Mode" is set to "Vivid" or when "Display Mode" is set to "Text".
Sound Adjustment
Sound Effect
Selects the sound mode. "Dynamic": Intensifies clarity and sound presence for better intelligibility and musical realism. "Surround": For surround sound (for stereo programmes only). [. . . ] 3 Specified standby power is reached after the TV finishes necessary internal processes. * *4 HDMI3 is available only for KDL-32S55xx, KDL-32P35xx, KDL-26S55xx. Design and specifications are subject to change without notice.
34 GB
PC Input Signal Reference Chart for PC IN
, HDMI IN 1, 2 and 3* Vertical Standard frequency (Hz)
60 60 60 60 60 60 VGA VESA Guidelines VESA Guidelines VESA VESA VESA
Signals
VGA SVGA XGA WXGA WXGA WXGA
Horizontal Horizontal (Pixel) Vertical (Line) frequency (kHz)
640 800 1024 1280 1280 1360 480 600 768 768 768 768 31. 5 37. 9 48. 4 47. 4 47. 8 47. 7
· This TV's PC input does not support Sync on Green or Composite Sync. · This TV's PC input supports signals in the above chart with a 60 Hz vertical frequency. [. . . ]