[. . . ] ⷠExtreme caution must be used when moving an appliance containing hot oil or other hot liquids. ⷠThis appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. ⷠThe use of accessory attachments not recommended by the appliance manufacturer may cause injuries. [. . . ] ⷠTo reduce risk of personal injury and to prevent damage to blender or container and cutter assembly, DO NOT insert utensils into blender container while operating blender. ⷠDo not store any kitchen utensils in the container because the blender would be damaged if inadvertently turned on. ⷠTo prevent possibility of serious personal injury, keep hands out of blender container while operating blender. Switch off the appliance and disconnect from power supply before changing accessories or approaching parts that move in use. If cutter assembly blades are loose, discontinue use immediately and replace cutter assembly. This appliance is intended for short periods of operation, with a rated operating time of 3 minutes. ⷠDo not leave blender unattended while it is operating. Fuse covers and carriers can be obtained from approved service agents. When using electrical appliances, basic safety precautions should be followed, including Failure to follow these instructions can result in death or electrical shock. 8 liter) of clean, cool water (60°F/16°C), mixed according to the instructions on the bleach. Fill container with sanitizing solution, replace cover and filler cap and run on LOW (1) speed for 2 minutes. Place empty container on base and run on HIGH (2) speed for 2 seconds to remove any moisture from the cutter assembly. Failure to follow these instructions can result in death, fire, or electrical shock. Do not put hands, spoons, or other utensils in container when blending. [. . . ] Do not put hands, spoons, or other utensils in container when blending. Failure to follow these instructions can result in broken bones, cuts, or other injuries. For assistance or replacement parts, call our Technical Service number: ++910-693-4277 www. [. . . ]