[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. Do not use it outdoors (except if it is designed to be used outdoors). [. . . ] Open the cutting board and place the cutting carriage on in such a way that the hook on its underside is lying in the groove of the running rail. Place the food to be cut on the carriage and press it slightly in the direction of the knife using the press. Insert the power plug into a 230V, 50 Hz safety-contact power socket which has been correctly installed. Apply slight pressure to the carriage so that it runs smoothly backwards and forwards. A tip: If you would like to produce particularly thin slices, moisten the knife with a damp cloth so as to prevent the food being cut from sticking to the knife. If you turn the button to a vertical position (direction , , block"), the device can not be turned on any more. In order to release the blocking please turn the screw in a horizontal position again (clockwise). Press: This should be placed on the carriage in order to press the material to be cut. IMPORTANT: Do not use the machine for more than 5 minutes without interruption. In order to withdraw the tray pull it out by the handle towards the front. The knife can be removed as follows for easy cleaning: Turn the blade lock through 90° to the left and remove the knife carefully with a glove. Do not clean the blade in soapy water, as otherwise lubricants will be removed. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]