[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. [. . . ] Before operating the machine for the first time, remove the transport safety device from the CD player if it is still in place. Headphone Socket If you want to listen on headphones you should use headphones with a 3. Switching On/Off Switch the device on by turning the volume control (20) in a clockwise direction and then adjusting the volume to the desired level. To switch the device off, turn the control to the left until it is heard to click into place. You should also take out the batteries if the device is not going to be used for a prolonged period. Insert a CD with the printed side facing forwards and close the CD deck. , , - -" appears in the display (7) followed by the number of tracks. With + SKIP/SEARCH (2) you can jump to the next or next-but-one track etc. The - SKIP/SEARCH button (2) can be used as follows: Press once = Press twice = Press three times = the current track is repeated from the beginning. In order to remove a CD, please press the compartment and lift the CD out carefully. PLAY/PAUSE (11) When a CD is playing Playback can be briefly interrupted. REPEAT (18) When a CD is being played the REPEAT button has a repeat function. Press twice (REPEAT display (17) lights up): The entire CD is repeated continuously. Programmed Repeat with the PROGRAM Button This can be used to program any desired sequence of tracks. Use the SKIP/ SEARCH +/- buttons (2) to select the desired track and then press the PROGRAM button (16) again. Select the next track with the SKIP/SEARCH +/- key (2) and press the PROGRAM key (16) again. The selected track numbers are shown in the display in the correct order. Press once the STOP key (5) to stop the playback while retaining the program. [. . . ] If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt. *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]