[. . . ] Before commissioning this device please read the instruction manual carefully. â· Please keep these instructions, the guaranty certificate, the sales receipt and, if possible, the carton with the inner packaging! [. . . ] Under no circumstances must the device be placed in water or other liquid, or come into contact with such. â· Should the device become moist or wet, remove the mains plug from the socket immediately. Position the speed regulator on 0/AUS (3) and make sure that the mixer (1) is not connected to the mains. Position the speed regulator on 0/AUS (3) and make sure that the mixer (1) is not connected to the mains. Press the end of the kneader hooks/beater (10) into the corresponding mixer openings until the hooks click into place. While pressing, turn slightly in order to facilitate the whole operation. The handmixer (1) can be used at various speeds set with the speed regulator (3). When removing the kneader hooks/beater (10), position the speed regulator on 0/AUS and make sure that the mixer is not connected to the mains. How to use the Mixer stand Then place the handmixer on the upper part (5) of the mixer stand (4) and push it back until the slot on the lower part of the mixer is locked onto the pin of the upper part (5) of the mixer stand. Mount the hooks as described above in the section "How to use the Kneader hooks/beater". In order to place the mixer bowl (8) below the mixer, press the button for the release of the upper part of the mixer stand (5) and lift the mixer. Place the mixer bowl filled with the desired ingredients onto the revolving plate (7). Press the button for the release of the upper part of the mixer stand (5) and lower the mixer. The handmixer (1) can be used at various speeds set with the speed regulator (3). [. . . ] the guarantee will be invalidated if the appliances are tampered with. For repairs within the guarantee period, please take the complete appliance with the receipt to the place where it was purchased. [. . . ]