[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. [. . . ] Connect the loudspeakers to the back of the music centre to the sockets market "Speaker R and L". Insert the plug of a set of headphones into the headphone socket ­ the loudspeakers are "muted". The stereo control light (9) beneath the adjustment knob only lights up when you have selected VHF stereo and receive the station in stereo quality. If reception is too weak and the station received crackles, it may be that this light will not come on. Try to improve reception by turning and bending or twisting and 30 In this frequency band programs are transmitted in "mono" only. Push a recorded audio cassette, with the tape downwards and the listening side facing forwards, into the compartment (20). If necessary, run the tape forwards or backwards as required by means of the arrow buttons. Between switching over and also to stop the tape running functions, always press the STOP/EJ button. Make sure that the cassette is not protected against dubbing (the copy protection tab on the upper edge of the cassette must not be broken). Select the recording source with the function button (7) and if necessary start this source. Playing can be interrupted briefly with the PAUSE key or stopped with the STOP/EJ key. Insert a music CD with the label facing upwards on the central button and close the CD deck cover. After a few seconds the total number of songs/tracks is shown in the display (27). By briefly pressing the SKIP II buttons (25/26) you can jump to the next or the previous track. If you keep one of these keys pressed down the search function starts. Press once (the REPEAT LED (11) flashes): the current track is repeated continuously. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]