[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. [. . . ] To line the base cap (15) push the cover cap (14) to the lowest position on the stand tube (13). Mount the rear protection grid (7) into the relevant slots and screw on the safety bolt (6) for the rear protection grid (7) by turning it clockwise. Screw on the fastening ring for the propeller (4) by turning it clockwise. Note: Ensure that the holes for the attachment screw in the front and rear protective grille are aligned one above the other. Make sure that the mains voltage to be used matches that of the device. You can adjust the inclination angle by tipping the blower casing with both hands. Operating To select the fan speed use the selector on the front to set one of the following speeds: 1 = slow, 2 = medium, 3 = fast. Blower Direction/Oscillation You can choose from the two following options: 1. Turn the device carefully with by hand by holding the fan on the sides and turning it either to the left or to the right until the limit stop. If the device is very dirty wet a cloth with water and then wipe the device dry once you have finished. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). [. . . ] ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]