[. . . ] An A3 Network MFP Copy/Scan/Print User's Manual
Regulatory model: MT-0904B
Avision Inc.
Safety Information
When using this equipment, the following safety precautions should always be followed.
Safety During Operation
In this manual, the following important symbols are used: WARNING: Indicates potentially hazardous situations, which if instructions are not followed, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. Please read and follow these instructions to ensure a proper operation and to avoid damage to the machine. Reading this is highly recommended.
WARNING: To avoid hazardous electric shock or fire, do not remove any covers or screws other than those specified in this manual. [. . . ] Remove 1st page and insert 2nd page on the
document glass or turn the other side of the ID Card on the glass. If you have not inserted 2nd page and press the Start button, this machine automatically starts
5. If you are using 4-UP, repeat step 4 and 5.
2-Up
4-Up
ID Card Copy Note: Making ID card copy using the duplex module may easily cause paperjam. It is recommended to make ID card copy in simplex mode.
41
Selecting Paper Tray
In normal operation, you do not need to select paper tray. However, if you wish to use another tray, for example, the manual tray, you can select the paper tray on the control panel.
To select paper tray,
1. Press the Input Tray button repeatedly until your desired tray location
LED is lit. Copy is starting.
42
Special Copy Features
Using the Book Mode
This mode enables you to copy the facing pages in a book or a magazine to separate sheets of paper. (Default is None. ) Place your facing pages FACE DOWN on the glass and align the bookspine with the bookmark in the center as illustrated.
Book Margin (e. g. 6mm)
3.
Select the bookspine margin you would like to cut by pressing the Menu button and select Copy Setup>Book Margin and choose your ideal margin from a selection of 0mm, 3mm, 6mm, 9mm, 12mm, 15mm, 18mm. Selecting 6mm means a total of 12mm (right 6mm, left 6mm) will be cut on the bookspine area to avoid a possible shadow. page next.
The right page is copied first, and the left
43
5.
If you wish to continue making copies, simply turn next page and press the Start button to perform next copying. ) (Note the selected setting If you have no further action in 30
Original
Book Mode (two separate pages)
Note: When using Book Mode, you can not specify the paper size in the input paper tray to be larger than A4 or Letter such as Legal, Double Letter, B4, 8K, or A3.
Using Auto Size
This feature allows you to automatically reduce or enlarge your original to fit the output paper from the printer. To use auto size,
1 Place your document FACE DOWN on the glass and align it with the
corresponding mark.
2 Press the Special Fn. button repeatedly until the Auto Size LED is lit.
(Default is None. )
3 Press the green Start button. The copy is starting and your original is
rescaled.
Note: When using Auto Size, only four types of paper sizes such as A4 , A4 , Letter , Letter , Legal, and A3 can be detected.
44
Using Auto Rotate
This feature allows you to automatically rotate the orientation of your original to fit the output paper of the printer. To use auto size,
1 2 3
Place your document FACE DOWN on the glass. The copy is starting.
45
Using Duplex Mode and Select Binding Orientation
To use duplex mode, you need to purchase and install a duplex module first. To use duplex mode and select binding orientation,
1 2
Place your original FACE DOWN on the document glass. Menu/to select Press , Num
3
Press the Set, the Left-arrow or the Right-arrow button. Common Setup Press , Set
4
Press the Set button and then the Left-arrow or the Right-arrow button repeatedly until "14. Output Mode Press , Set
5
Press the Set button and then the Left-arrow or the Right-arrow button until Duplex is displayed. Duplex Press , Set
6
Press the Set button to choose the selection. [. . . ] Backup Press , Set
4.
Press the Set button and the arrow key until the LCD screen shows "ON". Press the Stop/Clear button to leave the menu screen and enter the operation mode.
102
Specifying the Backup Path
After the Backup function has been enabled on the LCD panel, please follows these steps to specify your desired file path. On The MFP Setting dialog box, click the Backup tab to prompt the following
Backup screen.
2. Choose your desired file format from the File Format dropdown list box. [. . . ]