[. . . ] 13.
Buttons (see folding page for the picture)
Numerical buttons Off -hook button Redial / Pause button /P Flash R/ INT Direct memory button M1 Paging button (to retrieve the handset) Mute button On hook button Charge indicator/ On line (LED) Call log/Scroll Up / Scroll Down Key lock Program/Memory button /
9
Diablo 100
6
2
Topcom Diablo 100/Twin/Triple/Quattro
Topcom Diablo 100/Twin/Triple/Quattro
2
Display
ENGLISH
3
You are online INT = Internal communication EXT = External communication New numbers in call list Rechargeable battery level indicator The antenna indicates the quality of reception The antenna blinks when the handset is out of range!Microphone is muted Memory records are being retrieved or set up The keypad is locked -xhh:mm
There are more digits on the left
There are more digits on the right Program mode There are new messages in your voice mail
x = handset number Time: hh = hours, mm = minutes Answered calls Unanswered calls
3
·
Installation
Plug one end of the phone cable into the phone unit and the other end into the telephone line wall socket. Connect the small plug of the AC adaptor to the phone and the other end of the adapter cable to the electric socket. SOCKET Multi charger
Power cable · Insert 2 rechargeable batteries (AAA) inside the battery compartment of the handset. .
Diablo 100
+ -
+
Put the handset on the base unit. [. . . ] Charge the handset for a period of 24 hours before using the handset for the first time. To extend the battery life time, discharge the batteries completely from time to time. As soon as the handset emits a warning tone or when the battery icon is empty, you have to put it back on the base unit for charging.
Topcom Diablo 100/Twin/Triple/Quattro
Topcom Diablo 100/Twin/Triple/Quattro
4
Battery low indication
When the battery is empty, the handset no longer carries out operations. When a battery is completely empty and you have put the handset on the base unit for a short period of time, the Battery symbol will appear to be fully charged but this is actually not the case. We advise you to put the handset on the base unit for 12 hrs so that it can be recharged completely: Full battery Empty battery When you are in the middle of a conversation and the battery is almost empty, the handset will emit a warning signal. Place the handset on the base unit to charge.
5
5. 1
Operation
Outgoing calls
5. 1. 1 Making a phone call or redialing the last number
Press the Off-hook button . Enter the desired telephone number or press the Redial key to dial out the number you last called. Press the on-hook button when you want to terminate the call.
5. 1. 2 Call setup with dial preparation
Enter the desired telephone number. Press the Onhook button when you want to terminate the call.
5. 1. 3 Redial one of the last 5 numbers dialled
Press the Redial key . If you would like to dial one of the last 5 numbers dialled, press the scroll keys a few times until the desired number appears on the display. Press the Program button again, the external melody is heard and the EXT-icon is flashing. Use the scroll keys to select the desired volume (Off or 1-5) Press again to confirm the setting and to go to the next setting below.
5. 10. 2 Handset Internal melody and volume
The internal melody is heard and the INT-icon is flashing. Use the scroll keys to select the desired volume (Off or 1-5) Press again to confirm the setting and to go to the next setting below.
Topcom Diablo 100/Twin/Triple/Quattro
5
Topcom Diablo 100/Twin/Triple/Quattro
5. 10. 3 Date time setting
After setting the internal ring melody and volume you can set the date and time: DD-MM HH:MM (DD= day, MM=month, HH=houre and MM=minutes) Enter the date and time using the number key. Press again to confirm the setting and to go to the next setting below.
5. 10. 4 Setting the Dial mode
After setting the date/time you can set the dial mode. There are two types of dialling mode: - 1 - DTMF/Tone dialling (the most common) (default) OR - 2 - Pulse dialling (for older installations) Press `1' or `2' and press again to confirm the setting and to go to the next setting below.
5. 10. 5 Setting the Flash time
After setting the Dial mode you can set the flash time. There are two flash times: - 1 - 100ms OR - 2 - 250 ms Press `1' or `2' and press again to confirm the setting and to go to the next setting below.
5. 10. 6 Base melody and volume
The base ringer is heard. Use the scroll keys to select the desired volume (Off or 1-5) Press again to confirm the setting and to go back to standby.
5. 11
Keypad lock
When the keypad is locked, pressing any key will have no effect during standby (except holding the key). Press twice the key again to un-lock the keypad
6
Caller-ID function (CLIP)
The Topcom Diablo displays the telephone numbers of incoming calls. This function is only possible if you are subscribed to a telephone operator that provides this service. If the number is longer then 12 digits, you can press the program key to show the other digits!
6. 1 6. 2
New calls
will blink on the display.
When you've received a new unanswered call, the CLIP symbol
Consulting the Call list
Press the Call Log button . [. . . ] This function is only possible if you are subscribed to a telephone operator that provides this service. If the number is longer then 12 digits, you can press the program key to show the other digits!
6. 1 6. 2
New calls
will blink on the display.
When you've received a new unanswered call, the CLIP symbol
Consulting the Call list
Press the Call Log button . For answered calls the -icon appears and unanswered calls the -icon appears Press the program key to show the other digits (if longer then 12) or to show the date and time. When you reach the top or bottom of the list an error tone will be sounded You can leave the Call list by pressing the on-hook button.
6. 3
Calling a number from the Call list
Press the Off-hook
Scroll through the Call list until the desired number is shown on the display. [. . . ]