[. . . ] In order to play Quake III Arena with your Dreamcast Broadband Adapter, you must have access to a highspeed network or Internet Service Provider (ISP) that uses either Static IP, DHCP, or PPP over Ethernet (PPPOE). [. . . ] Windows 95/98/ME users can get information about their high speed network settings by: 1) Go to the Start Menu and choose Run. You must have the TCP/IP protocol installed on your PC to be able to use winipcfg. Windows 2000 users can get information about their high speed network settings by: 1) Go to the Start Menu and choose Run. 3) When the Command Prompt window appears, type "ipconfig /all" at the command line. 5) Select "Next" to connect online. Additional Network Information from your PC 1) Right mouse click on the Network Neighborhood icon on your Desktop and select Properties. 2) In the Network Properties Window, highlight TCP/IP and select the Properties Button 3) In the IP Address section, if it says "Specify an IP Address", your ISP is using Static IP; if the "Obtain an IP Address Automatically" option is selected, you will want to try to logon with either DHCP or PPPOE. If "Enable DNS" is selected, write down the IP Addresses of the DNS Servers that are listed in the DNS Server Search Order section; otherwise, contact your ISP for the IP Address of a valid Primary Domain Name Server (DNS) and, if available, the IP Address of a Secondary DNS (not required). Static IP To connect to an ISP that uses Static IP, follow these steps: 1) 2) 3) 4) 5) 6) 7) 8) 9) Select the Internet Game option from the Mode Select Screen. Enter the IP Address of the Router on your network in the Gateway field. [. . . ] Enter the IP Address of the Router on your network in the Gateway field. [. . . ]