[. . . ] Insert the lower posts into the square slots near the hood edges, ensuring the ring follower is facing upwards. [. . . ] 8) Using the metric round head screw attach the glass locking plate to the ring follower of the lower post. Repeat this step for the other two glass panes, ensuring the panes are properly positioned. 9) Rotate the hood, follow step 3 of the assembly instructions for the island hood and take care to insert the hood brackets on the U pipe, previously hooked to the ceiling, until the correct level "h" is reached. To improve the hold of the pipe fastening bolt we suggest to determine the position of hole "A" and then drill the U shaped upper post with a ø 2. [. . . ] 11) Having ceiling mounted the dish-rack, insert the two supplied U-profiles into the two holes on the short sides of the dish-rack bottom and screw them on using the two supplied metric round head screws through the holes at the top. [. . . ]