[. . . ] Follow steps 1 and 2 of the instructions for assembling the island hood. [. . . ] Position the two glass panes (short and long sides) against an edge and parallel to the side of hood where the previously fitted plate is located. Using the metric round head screw attach the glass locking plate to the ring follower of the lower post. Repeat this step for the other two glass panes, ensuring the panes are properly positioned. Rotate the hood and follow step 3 of the instructions for assembling island hoods, making sure you insert the hood supports to the previously ceiling mounted U-tube until at the correct height. [. . . ] 10) Having ceiling mounted the dish-rack, insert the two supplied U-profiles into the two holes on the short sides of the dish-rack bottom and screw them on using the two supplied metric round head screws through the holes at the top. [. . . ]