[. . . ] BO-SF | Stabilized Focus Positioning up to 30 kW FEATURES · · · Practically free of focus shifting, even with high power and single mode Safe for operating with high-power laser output Tested up to 30 kW (with the YLS-30. 000 from IPG Laser GmbH) DESCRIPTION OF FUNCTION The BO-SF laser processing optics (from the scapacs® modular system) are designed for industrial use where a stable focal position is critically important. [. . . ] Thus, the BO-SF can be easily integrated into a variety of different applications. CHARACTERISTICS · · · · · High level of process reliability ­ with practically no shift Highly efficient process ­ with very good image quality Very good process stability ­ with a long-lasting, stable focus pos. Minimal dependence between the focus position and contamination Excellent emergency-operations functionality, with water-cooled mirror. Thus functionality on the optical surfaces is guaranteed, even with gradual contamination or small weld penetrations. The system can be opened by removing the protective glass, which enables the system to be cleaned (for example, with clean air or gas before commissioning). [. . . ] laser output (cw) Measured focus shift 30 kW ± 0. 02 mm/kW @ M=1:3, 1; FColl=80 mm 1-6 kW fibre laser For all prevalent solid-state lasers (up to 450 mrad @ FColl=80 mm) <2% Collimation Focus 80, 120, 175 175, 250, 350, 500 Laser suitability (acceptable round angle) Scansonic_BO-SF_DABv0. 8_en. doc Power loss Focal distances [mm] (can be combined as desired - others on request) Fibre couplings (others on request) Trumpf type D, Trumpf type B Optoskand QBH, Optoskand QD IPG HLC-8, LCA Intensity distribution in the focus www. scansonic. de no responsibility is taken for the correctness of this information and are subject to modifications Page 1 from 1 [. . . ]