[. . . ] DIRECT DRIVE TURNTABLE T. 90 USB USERS MANUAL IMPORTANT SAFETY PRECAUTION 1. Read Instructions ­ All the safety and operating instructions should be read before this product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] Do not allow the needle to drop onto the mat or the turntable platter during this adjustment. Now, carefully hold the tone arm in one hand while rotating the numbered ring on the front of the counter-weight with the other hand to the "0" setting. Next, without touching the numbered ring, Rotate the rear counterweight until the desired needle pressure reading is next to the line on top of the tone arm tube, see the instructions. Included with your cartridge for proper settings. Visit www. stantondj. com for downloadable updates, videos, and news about this product. 2 CONTROLS OVERVIEW 1 2 20 19 18 17 16 15 14 13 12 6 2 11 10 T. REVERSE - This button is used to reverse the direction of the platter rotation. STROBE DOTS - The dots around the edge of the platter are used in slider will only affect the speed of the platter. The key (pitch) will remain conjunction with the light located inside the motor ON/OFF switch. the platter is in rotation, the dots help to indicate the speed of rotation. The speed is lower than the displayed speed (33, 45, 78) when the dots are 10. HEADSHELL LOCKING NUT - Attach the headshell by inserting it into flowing to the right. It is higher than the displayed speed (33, 45, 78) when the front end of the tone arm. Turn the locking nut clockwise with the the dots are flowing to the left. When the strobe is stopped, the platter head shell firmly held horizontally. PITCH SLIDER - The Pitch Slider is used to speed up or slow down and records stable and centered. gently place the stylus on the record using the headshell finger Rotate clockwise to turn on the motor. Do not drop the stylus onto the record as it may cause spinning until the start/stop button has been pressed. counterclockwise during playback (off position) for a slow winding down effect. PITCH SELECT - Press the button to select between +/-8% and +/-12% pitch range. TONE ARM CLAMP AND REST - Use this rest for the tone arm and 45 rpm ­ Press 45 clamp it in position during transportation. When installing a cartridge, refer to the installation instructions supplied by the manufacturer of that cartridge. 3 CONTROLS OVERVIEW 16. ANTI SKATE KNOB - When a record is playing, a force is generated drawing the stylus towards the center of the record. This control compensates for that force and needs to be set to the same value as the counter weight pressure ring. [. . . ] The easiest way to do this is to press the Save button and choose Save As Multiple Audio Files. 7 9 8 7. You can also rename the tracks here by double-clicking on them and entering a new name. Below the list of tracks are two options that allow you to choose the format to save the tracks in, and the location to save your tracks to on your disk drive. If you choose to save the tracks as MP3 files, then the next window allows you to choose the bitrate to save them in. [. . . ]