[. . . ] Document ID: Synology_QIG_2bayCL_20100319 SAFETY INSTRUCTIONS Please read these safety instructions carefully before use, and keep this manual in a safe place for your future reference. Keep away from direct sunlight and away from chemicals. [. . . ] The rear panel should be facing you. 2. Push the upper case forward to slide it open. Lift the upper case and set it aside. 3. Follow the steps below to install the hard disk: a. If you are using a 3. 5" hard disk, slide the hard disk into the hard disk bay and push it all the way back until it is connected to the SATA connector. Secure the hard disk with the 4 hard disk screws provided. b. If you are using a 2. 5" hard disk, place the hard disk on the 2. 5" Disk Holder and tighten the 3 screws on the sides. You will need to purchase the 2. 5" Disk Holder (Type C) separately. Slide the 2. 5" Disk Holder into the hard disk bay and push it all the way back until it is connected to the SATA connector. Slide the upper case back to its position. 6. Secure the case with the 2 case screws provided. TURN ON SERVER 1. Connect the AC power adapter to the server and plug in the AC power cord to the power outlet. 2. Use the LAN cable switch/router/hub. to connect the server to your 3. Press the power button on the front panel to power up the server. Wait for the POWER LED to be constant blue. INSTALL SYSTEM SOFTWARE Windows User 1. Insert the installation CD to your computer. 2. Choose Set up the Synology Server on the autorun menu. Click Browse to select the ". pat" installation file in the installation CD. [. . . ] For more information or online resources, please visit http://www. synology. com. [. . . ]