[. . . ] User Guide for
BB3200 Digital Cordless Telephone with Caller Display
Unpacking your BB3200 system
In the box, you will find: the base unit telephone a telephone line cable for the base unit a mains power adapter for the base unit the cordless handset (up to five, depending on which BB3200 system you've bought) this user guide up to five charger pods, each with a mains power supply for multi handset systems Keep the packaging materials in a safe place in case you later need to transport the unit. Keep your sales (till) receipt, which is your guarantee.
Charging batteries for the first time : . Before you start to use your telephone make sure that all batteries are fully charged for 15 hours.
Important note -- emergency calls
The BB3200 cordless handset is not designed for making emergency calls when the mains power fails. For Emergency calls you should have a basic phone that does not need a mains power, connected to your line so that you can make calls during a power failure. [. . . ] Handset tones and volume setting
To adjust the earpiece or speakerphone volume during a call
While making or answering a call with the handset: 1. Press to decrease to increase the earpiece or loudspeaker volume , press the earpiece or loudspeaker volume. The earpiece can be adjusted from 1 to 5, and the loudspeaker can be adjusted from 1 to 6. You will hear an error tone if you try to adjust beyond these limits.
To adjust Handset ringing melodies
Note: There are 10 different melodies to choose from. Melodies 1 and 2 are mono- tone rings, and melodies 3 to 10 are polyphonic melodies. Press
OK OK
To adjust the ringing melody for intercom call,
OK
à "PHONEBOOK" à "ALARM"
three times à "HS SETTINGS"
once à "RING SETUP"
à "INT RING" à "MELODY" à "MELODY 1"(or 2. 3. . 9, 10)
OK
OK
to scroll through the 10 ring melodies. Press
OK
to confirm the selected melody to go back to idle mode at any time.
*
Press
To adjust the ringing melody for incoming external call 1). Press
OK OK OK OK
three times à "HS SETTINGS"
à "ALARM"
once à "RING SETUP"
à "INT RING" à "EXT RING" à "MELODY" à "MELODY 1"(or 2. 3. . 9, 10)
or
OK
to scroll through the 10 ring melodies. Each one will play as its number is shown.
à to confirm the selected melody.
* Press
to go back to idle mode at any time .
16
To adjust handset ringer volume
The handset or of turning the volume * you've set thehas a choice of fiveOFF, you levels hear any melodyringer off. Press
OK OK OK OK
à "PHONEBOOK"
three times à "HS SETTINGS"
à "ALARM"
once
à "RING SETUP"
à "INT RING" à "EXT RING" à "MELODY" à "VOLUME"
9. Press Menu/OK then
OK
or
à "VOLUME1, 2, 3, 4, 5 or OFF"
to confirm the selected volume level. To adjust ringing volume for intercom calls
à "PHONEBOOK" à "HS SETTINGS" à "ALARM"
three times
OK
one time, à "RING SETUP" à "INT RING"
à "MELODY" à "VOLUME"
or
OK
8. Press Menu/OK then
OK
à "VOLUME1, 2, 3, 4, 5 or OFF"
to confirm the selected volume level. to go back to idle mode at any time.
* Press
To set handet TONES"
There are three handset tones that can be turned on or off via the handset menu. Press
OK
three times à "HS SETTINGS"
à "ALARM"
17
Binatone Help Line - 0845 345 9677
4. Press
OK OK
twice à
"TONE SETUP"
à "KEY TONE" à
OK
"ON" to select on or off
or
to confirm your selection to go back to idle mode at any time.
*
Press
(2). To turn battery low warning tone on/off
When the battery level is low, as well as seeing the symbol( ) on the display you also hear a tone. Press
OK OK OK OK
three times à "HS SETTINGS"
à "ALARM"
twice à "TONE SETUP"
à "KEY TONE"
once or
à "BATTERY LOW"
to select "on" or "off "
à "ON"
to confirm your selection to go back to idle mode at any time.
* Press
OK
(3). To turn out of range warning tone on/off:
When the handset goes out of range of the base unit, you will hear a tone, you can turn the out of range warning tone off if you prefer. Scroll
OK OK
OK
three times à "HS SETTINGS"
à "ALARM"
Twice à "TONE SETUP"
à "KEY TONE"
Twice à "RANGE ALARM"
à "ON"
or
OK
to select "on" or "off "
*
9. Press Press
to confirm your selection to go back to idle mode at any time.
18
9. Using a multi-handset system
If you have a BB3200 Twin, Triple or Quad system, you already have two, three or four handsets. You can have up to 5 handsets registered to the base unit, as numbers 1, 2, 3, 4 or 5. [. . . ] Do not use non-rechargeable batteries in your BB3200 they may burst, causing damage.
If the fault persists. . . · Disconnect all other instruments connected to the same line as the BB3200 and try to make a call
Binatone Help Line - 0845 345 9677
· · · ·
Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket. If the call does not work, and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. Contact the service provider (the BT engineers on 151 for UK only, or your cable company). [. . . ]