[. . . ] HE902SB-R1_NA1ULLA_ENG_MFL34656567
5-DVD Changer Home Theater System
OWNER'S MANUAL
MODEL: LHT764
Main Unit - LHT764 Speakers - SH92SB-S SH92SB-C SH92SB-W
R
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
For service/ support Call: Toll Free Number
© Copyright 2007, LG Electronics U. S. A. , Inc.
1-800-243-0000
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord Most appliances should be placed on a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. [. . . ] [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)] Note: Certain speaker settings are prohibited by the Dolby Digital licensing agreement.
Vocal
Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound.
Size
Since the speaker settings are fixed, you cannot change the settings. Volume Press b / B to adjust the output level of the selected speaker. (-5dB ~ 5dB) Distance If you connected speakers to your unit, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. (You can't adjust front / Woofer speakers) Test Press b / B to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. Front Left (Front L) Center Front Right (Front R) Rear Right (Rear R) Rear Left (Rear L) SubWoofer
HD AV Sync
When using Digital TV. Sometimes AV signal could not be transmitted simultaneously because of later transmission of video signal compared to audio signal. Because it takes some time to convert analog video signal to digital one in the Digital TV. And It means that you may not enjoy picture on the screen and sound from speaker at the same time even though it is one scene. In the HD AV Sync menu, you could adjust delay time to audio signal for simultaneous AV signal transmission Delay time could be set up with 10msec unit. So you need to adjust optimal delay time complying with your TV.
21
Installation and Setup
3. Adjust options using v / V / b / B buttons.
LOCK (Parental Control)
LOCK
Rating Password Area Code Unlock
Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 37. Press ENTER to confirm your Area code selection.
****
US
Move
Select
Rating Blocks playback of rated DVDs based on their contents. To access the LOCK options, you must input the password you have created. Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. Unlock: If you select unlock, parental control is not active and the disc plays in full. Press ENTER to confirm your rating selection, then press SETUP to exit the menu. To change the password, press ENTER when the "Change" option is highlighted. Input a new password and press ENTER. Enter it again and press ENTER to verify. If you forget your password If you forget your password, you can clear it using the following steps: 1. [. . . ] If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1, 000 hours of use. For details, please contact your nearest authorized service center.
HANDLING THE UNIT
When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. [. . . ]