[. . . ] NEVER operate the transceiver with a
EXPLICIT DEFINITIONS
The explicit definitions below apply to this instruction manual. DEFINITION Personal injury, fire hazard or electric shock RWARNING may occur. If you experience a ringing in your ears, reduce the volume level or discontinue use.
NEVER connect the transceiver to an AC outlet or to a power source of more than 14 V DC. NEVER connect the transceiver to a power source that is
DC fused at more than 5 A. [. . . ] w Push [CLR] to exit from the emergency frequency.
s Setting a frequency
ï Using keypad
q Push [PWR] for 0. 5 sec. to turn power ON, then push [CLR] to select the frequency mode when memory CH number or WX CH number appears on the function display. · When a digit is mistakenly input, push [CLR] to clear, then start again. · Only [2], [5], [7] and [0] can be entered as the 5th and final digit. version has VHF marine WX (weather) channel receiving capability for flight planning. q Push , then push [ENT (WX)] to select WX channel mode.
· "WX--" and previously selected channel number appears.
s Side tone function
When using an optional headset, such as those from the David Clark Co. via the OPC-967 HEAD SET ADAPTOR, the transceiver outputs your transmitted voice to the headset for monitoring. 32)
D Setting the side tone level
q Push [PTT] to turn the transmit mode ON. w During transmit mode, push [Y]/[Z] several times to adjust the monitoring level. NEVER operate the transceiver with a headset at high volume levels for long period. If so, reduce the monitor level or discontinue use.
w Rotate the [DIAL] to select the desired WX channel. 12
MEMORY OPERATION
4
s Programming a memory channel
The transceiver has 200 (10 BANK x 20 CH) memory channels for storage of often-used frequencies. w Select the desired frequency.
· Push , then push [ENT (WX)] to select a weather channel. * · Set the desired frequency or WX channel* using the [DIAL] or keypad.
· EXAMPLE: Programming WX-05* into memory BANK 3/ memory channel 2.
then
[0], [5] or [5] [ENT]
e Push
, then push [MR (MW)].
then
· Memory BANK and memory channel number appears.
r Rotate the [DIAL] to select the desired memory channel number.
· [M] blinks. [3] or
t Push [ENT] to program the information into the channel and return to Frequency mode.
*Weather channel: U. S. A. version only.
[0], [2] or [2] then [ENT]
13
4
MEMORY OPERATION
s Memory names
ï Programming memory names
The memory channel can display a 6-character comment as well as a frequency. q Rotate the [DIAL] to select the desired frequency in Frequency mode. e Rotate the [DIAL] to select the desired memory channel to be programmed.
· Push [BANK] to select the BANK number if desired. Push [CLR] to exit the BANK selection mode.
key Character 1 4 7 1, Q, Z 4, G, H, I 7, P, R, S
key Character 2 5 8 0 2, A, B, C 5, J, K, L 8, T, U, V 0, space
key Character 3 6 9 3, D, E, F 6, M, N, O 9, W, X, Y
ENT Program
ï Clearing memory contents
Unwanted memory channels can be cleared. Programming over a memory channel also clears the previously programmed contents. · "-- -- -- -- -- --" appears momentarily, then the next selectable channel appears.
r Push [MR] to enter the memory name programming mode.
· "-- -- -- -- -- -- " appears on the display.
t Push the appropriate digit key several times to select the desired character as listed at right.
· To erase a character, overwrite with a space (displayed as _). · To move the cursor forwards or backwards, use [DIAL].
y Push [ENT] to program the name.
· Flashing stops. · When no name is programmed, the display shows the operating frequency. [. . . ] 9) CS-A23 CLONING SOFTWARE Provides quick and easy programming of items, including private channels, scan settings, etc. , via an IBM® compatible PC to transceiver. OPC-474 CLONING CABLE Cloning cable for transceiver to transceiver cloning. OPC-478 CLONING CABLE Cloning cable for PC to transceiver cloning.
BP-200L
1
9. 6 V
760 mAh
6 hrs
Operating periods are calibrated for the following conditions: at 25°C (77°F), Tx (high power) : Rx : standby = 5 : 5 : 90
D Other options
BC-110A WALL CHARGER (same as supplied. Depends on version) Used for regular charging of the connected battery pack. [. . . ]