[. . . ] OWNER'S MANUAL
DVD PLAYER
DVL100CC
If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 287- 4871 Please read before using this equipment.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. [. . . ] 2 Press the OPEN/CLOSE button.
¡The disc loading tray will open.
appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.
¡With DVDs that use some titles for playback
program signals, playback may start from the second title, or it may skip these titles.
¡During the playback of two layered disc, pictures
3 Place a disc into the tray.
¡Make sure the disc is sitting properly in the correct
recess, with the label side up.
may stop for a moment. This is not a malfunction.
USING THE DVD MENUS
DVD
Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.
4 Press the PLAY button.
¡The tray will close automatically, and playback will
then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.
¡When you playback the DVD which a title menu is
1 Press the MENU button.
¡The DVD menu will appear.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
recorded, it may appear on the screen. In this case, refer to "USING THE TITLE MENU".
setting, and then press the ENTER button.
5 Press the STOP button to stop play.
3 Playback will start from the selected title.
13
EN
2A10
USING THE TITLE MENU
DVD
With a DVD containing a title menu, you can select desired titles from the menu.
RESUMING PLAYBACK FROM THE POINT WHERE PLAYBACK STOPPED
DVD CD
1 Press the STOP button during playback. ¡Playback will stop, and then appear the resuming
message at the center.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
Press 'PLAY' to play from here. To play the beginning, press 'STOP' first and then 'PLAY'.
CALLING UP A MENU SCREEN DURING PLAYBACK For DVDs
¡Press the MENU button to call up the DVD menu. ¡Press the TITLE button to call up the title menu.
2 Press the PLAY button. Playback will start
from the point where the previous playback session was stopped.
B
Note
¡Contents of menus and corresponding menu
operations may vary between discs. Refer to the manual accompanying the disc for details.
Note
¡The resume function can be reset by pressing the
STOP button twice or by opening the disc loading tray.
PAUSING PLAYBACK OR DISPLAYING A STILL PICTURE
DVD CD
STEPPING THROUGH FRAMES
DVD 1 Press the PAUSE button while playback is
paused. ¡The next picture frame is disF
1 Press the PAUSE button during playback.
¡Playback will pause, with sound
F
muted.
played with sound muted each time the button is pressed.
2 Press the PLAY button to resume playback.
B
2 Press the PLAY button to resume playback.
B
14
EN
2A10
FAST FORWARD/REVERSE
DVD CD
STARTING FROM A DESIRED TRACK
CD 1 Press the numeric buttons to enter the
desired track number. ¡The selected track will be located, and playback will start.
1 Press the FWD g or REV h button during playback. ¡For DVDs, pressing the FWD g or REV h but-
ton cycles the playback speed in four steps. ¡For audio CDs, the playback speed is ×16 fixed.
REV E Button
Ex2
FWD D Button
Dx2
You can also press the SEARCH MODE button, use the numeric buttons to enter the track number. When the track number is entered in the entry box, playback of the desired track will start automatically.
TR : 5
TRICKS WITH THE SKIP BUTTONS (H, G)
Ex8 Dx8
Ex30
Dx30
Ex60
Dx60
If the SKIP button G is pressed during playback or while playback is paused, the current track will be skipped and the next track will be played. When the SKIP button H is pressed once, the top of the current track will be located for replaying. When the SKIP button H is pressed again within 2-seconds after playback begins, the previous track will be located.
PLAYING FROM A DESIRED TITLE OR CHAPTER
DVD 2 Press the PLAY button to return to normal
playback speed.
1 Press the SEARCH MODE button and then
press the numeric buttons to select a title or a chapter. ¡Perform the title search and the
TT : 1/ 2 CH __ / 49
SLOW MOTION
DVD 1 Press the FWD g button while playback is
paused. ¡Pressing the FWD g button cycles the playback
speed in three steps. Select an appropriate speed while referring to the speed indication on the screen.
FWD D Button ×1/16
chapter search after setting them on the same screen at the same time. ¡When playback is stopped, press the numeric buttons to select a Title. Notes
TT : _/ 12 CH : 12/ 49
×1/8
¡Playback from a desired title or chapter is not avail-
able with some DVDs.
¡Some discs which the chapter number isn't dis×1/2
played cannot playback from a desired chapter. [. . . ] 29
EN
2A10
HANDLING PRECAUTIONS
SERVICING
Should your DVD player become inoperative, do not try to correct the problem by yourself. Turn off, unplug the power cord, and please call our help line at 1-800-2874871, to locate an Authorized Service Center.
CABINET CLEANING
¡Wipe the front panel and other exterior surfaces of
the DVD player with a soft cloth immersed in lukewarm water and wrung dry.
¡Never use a solvent or alcohol. Such chemicals may cause damage and discoloration to the exposed surfaces.
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY
¡If the player still does not perform properly when it is operated while referring to the relevant sections and to
"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
¡Use discs which have the following logos on them. [. . . ]