[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. [. . . ] In the analog mode, the current channel number and the audio mode are displayed. The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV program rating are displayed on the top-right corner of the TV screen. A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. Department stores and supermarket were ) 3 broadcast station 4 channel number 5 audio language (Refer to "Switching Audio Mode" on page 15. ) 6 effective scanning lines and scan mode 7 digital TV format 8 program aspect ratio 9 CC (not available if closed caption is set to "Off") 10 child lock rating When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll. While the program guide is displayed, the closed caption function is interrupted. 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio. Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fill the screen. Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically to fill the screen. Display the picture with its center at the original size and the edges stretched horizontally to fill the screen. If external input is used, it is not possible to register the channel and "Unavailable" will be displayed on the TV screen. You can choose English, Spanish, or French as your on-screen language. This function lets you check the digital signal strength of each channel. If you need the English menus instead of the Spanish or French menus, press [SETUP]. Use [Cursor K / L] to select "IDIOMA" or "LANGUE", then press [ENTER]. Before you begin: You must set "Home" in "Location" (Refer to page 31). Otherwise, the settings you adjusted will not be memorized after you turn off the unit. Use [Cursor K / L] to select the desired setting, then use [Cursor s / B] to adjust. You can adjust the sound mode, equalizer and some other sound functions. Before you begin: You must set "Home" in "Location" (Refer to page 31). Otherwise, the settings you adjusted will not be memorized after you turn off the unit. [. . . ] If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. With a digital camera (including built-in cell phone cameras): Point the Digital Camera towards the remote control infrared diode at the front of the remote control. Press any button on the remote control and look through the camera display. If the infrared pulsating light appears through the camera, the remote control is sending out an IR signal. [. . . ]