[. . . ] The individual shutter controller: - Can simultaneously control a set of products (actors) that have been associated with it during the learn phase(1). [. . . ] The individual shutter controller: - Can simultaneously control a set of products (actors) that have been associated with it during the learn phase(1). As Leader: The individual shutter controller can control the following using its Up - Stop - Down keys: - The opening that is connected to its terminals - The openings that are connected to the terminals of the other products associated with it (the actors). As Actor: The individual shutter controller can participate in 16 different scenarios, locally executing the Up - Stop - Down commands from the other Leaders. Step 1: Start the learn phase (on the LEADER) Press the command key that is to control the scenario To add a number of products to the scenario, repeat operations and for each actor. Press the command key that is to be associated with the leader To remove the product from the scenario, go to step 3 Step 3 : Record the scenario (on the LEADER) Clear all the scenarios linked with the command key (on the LEADER) The scenario is cleared Press LEARN Press the command key and hold it down for 10 s 5s Clear all the scenarios linked to this product (on the LEADER) Return the product to factory configuration Press LEARN Press LEARN and hold down for 10 s 5s The indicator lamp goes off The indicator lamp blinks slowly 11 The indicator lamp blinks quickly The indicator lamp flashes [. . . ] Step 1: Start the learn phase (on the LEADER) Press the command key that is to control the scenario To add a number of products to the scenario, repeat operations and for each actor. [. . . ]