[. . . ] [. . . ] (5)To clean the stand, gently wipe the surface with a soft cloth moistened with a mild cleaning solutions. Do not use chemicals such as thinner or solvent. HexHead Allen bolt × Spring Washers × joint× Support Column× Base Plate× Flush Head Allen Screw× Large Allen Wrench× Small Allen Wrench× Screws× Code Stoper× Hex Head Allen Bolt× Spring Washers× Flush Head Allen Screw× Logo mark× Use the Allen wrench to attach the Hush head Allen screws, fastening the base plate to the support column. Attention Use the Allen wrench after completely putting it into the bottom of the Hush head Allen screw. Slip the hex head Allen bolts through the spring washers, then use the large Allen wrench to fasten the joint to the support column with the bolts. Use the Allen wrench to remove the flush head Allen screw and washers, separating the speaker body from the base plate. Slip the screws through the spring washers which is removed from the base plate, then use the screw driver to fasten the speaker body to the joint with the screws. Base Plate L×Wmm) 280×280 Height mm 870 Weight (kg) 7 Specifications and external appearance may change without notice. [. . . ] [. . . ]