[. . . ] [. . . ] If your AP is equipped with N-type connector, it will convert the antenna signal to N-Type connector. The cable has a female N-Type connector on one side to connect with Outdoor AP/Mesh and male N-Type connector on the other side to connect with outdoor antenna. If you want to connect WH-9000MESH and WH-9100MESH to external antenna, you would need this cable.
Specifications
Connector type
- Male RP N-Type to Male N-Type - Connect between outdoor AP and antenna
Material
Length
- 1. 5 meter
- Conductor: bare copper wire - Insulation: PEF - Shield: tinned copper wire - Jacket: PVC
Impedance
Attenuation
- 50 Ohms nominal
Capacitance
- 24. 5 pF/ft - 65 GHz
Cut Off Frequency
- 30MHz: 5. 8 dB/100M - 50MHz: 7. 5 dB/100M - 150MHz: 13. 1 dB/100M - 220MHz: 15. 9 dB/100M - 900MHz: 32. 6 dB/100M - 1500MHz: 42. 4 dB/100M - 2000MHz: 49. 3 dB/100M - 2500MHz: 55. 4 dB/100M - 5800MHz: 86. 5 dB/100M
5F, No. 96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
Physical
- Minimum Bend Radius: 12. 7mm
Temperature
- Operating: -55 to +200 degree C
Ordering Information:
AirLive CFD-200-FNN-1. 5M 1. 5 Meter Antenna Cable
5F, No. 96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan [. . . ] [. . . ]