[. . . ] If the liquid gets in the eye: Please immediately rinse with fresh water for at least 15 minutes and then consult with a physician to receive treatment as soon as possible. If anyone accidentally swallows the liquid: Please rinse the mouth with water, drink large amounts of water and contact a physician to receive treatment as soon as possible. -2- English 1-3 Caution When Using the Camera This product consists of intricate electrical parts. To ensure the camera photographs normally, do not drop or hit the camera when taking pictures. Sealed vehicles or places exposed to direct sunlight or places subject to extremely high temperatures or heat. [. . . ] Light Frequency Select the correct frequency type (50Hz or 60Hz) according to your region. 9. Format Media If there is a memory card inserted, it will only format the memory card, not the internal memory. Reset to default factory anticipated settings Chapter 5 Preparing Your Camera 5-1 Attaching the Strap -16- English Insert the thin end of strap into the strap holder. . Pass the other end of strap through the loop. Stretch the strap tightly. 5-2 Loading Batteries Turn off the power of camera. If the batteries are in low power, please change new batteries as soon as possible to keep the camera operating normally. -17- English Slide the switch on the battery cover in the direction indicated by the arrow. Insert the batteries as indicated on the inner side of the cover. Close and lock the battery cover. -Memory card get dirt : Please use clean and soft cloth to clean memory card properly and insert again. -Memory card malfunction: Please contact memory card supplier for further assistance. -Card slot in camera malfunction: Please contact authorized dealer to request further assistance. 5-4 Setting Up the OSD Language Before using the camera, please turn the Mode Dial to Setup Mode select "Language" to set the OSD language. Date/Time Before using the camera, please turn the Mode Dial to Setup Mode select "Date/Time" to set the date and time. and then Chapter 6 Getting Started -20- English 6-1 Setup Mode By using the Setup Mode, you can adjust the basic camera functions, including: Image Size, Image Quality, Self-timer, White Balance, EV Compensation, OSD Language, Date/Time, Preset Settings, Format Media, and TV-Out items. Using the lens cover located on the front of the camera to turn on/off camera. After turn on the camera, the red LED will be blinking, and the Setup screen will be shown on the LCD monitor. on the MENU/ENTER Button to return to the on the MENU/ENTER Button to enter the selected / on the MENU/ENTER Button to move and 6-2 Record Mode Record Mode offers you a quick and easy way to take the ideal pictures you want. Using the lens cover located on the front of the camera to turn on the camera. After turn on the camera, then the last image recorded appears on the LCD monitor. The camera will process metering and a yellow "[ ]" will appears in the center position of the LCD monitor. Press and hold the Shutter button continually and it will keep the metering value. When taking a picture, you can press the Flash Button modes: Auto, Red-eye reduction, and Off. Press the Mode Display Button are five display modes: Standard Display, Full Display, Image Only, LCD Monitor Off, and Only Operation Settings. Using the MENU/ENTER Button to set the details settings for recording images, e. g, Image Resolution, Image Quality, Self-timer, and Light Frequency -21- English settings. By pressing the button on the center of the MENU/ENTER Button , the menu items will appears on the LCD monitor. on the MENU/ENTER Button / to move and select the desired to adjust the 7. Press the arrow buttons on the MENU/ENTER Button digital zoom and a message about digital zoom will appear on the left side of the LCD Monitor. [. . . ] Click Finish to restart the computer and finish the camera driver installation. 7-2 Installing the Software Applications to the PC Install Arcsoft Software (Take Photo Impression Installation for example) 1. Insert the software CD-ROM supplied with the package into the CD-ROM drive. If your CD-ROM drive doesn't support the auto-run function, double click on the "My Computer" icon on the desktop. Then double click on the CD-ROM drive icon -27- English and click the InstallMgr. exe file in the root directory. [. . . ]