[. . . ] No objects filled with liquids, such as vases, shall be placed on this appliance. If a foreign object enters the unit, immediately disconnect the mains power. No naked flame sources, such as lighted candles, should be placed on the appliance. Don't cover any ventilation openings as this may result in overheating. [. . . ] Use the supplied cinch/cinch cable to connect this output to a CD/line input of your mixing unit. dIGITAL OUT socket: Use this connector to connect the digital signal (S/PDIF format) to the input of a digital amplifier or digital recorder (ex. Mini disc) MAINS input: connect the CD player to the 230V AC mains, using the supplied power-cord. SEARCH WHEEL (OUTER RING): This wheel has 4 forward and 4 backward speed positions for searching through songs. The more you turn the wheel in either direction the faster you will search through the music. JOG WHEEL (INNER RING): This jog wheel serves 2 functions depending on the mode you are working in. The jog wheel acts as a slow frame search (1/75sec) control when the CD is not playing but either paused or set to a cue point. To set a new cue point, spin the wheel and press PLAY when you have determined the proper position. The jog wheel temporarily bends the pitch of the music up to +/-16% if the song is already playing by rotating the wheel clockwise to speed up or counterclockwise to slow down. TRACK SEARCH Buttons: These buttons are used to select the track to be played. CUE button: Pressing the CUE button during play provides an immediate return to the position at which play was started. Playback is started immediately from the programmed cue point for as long as the CUE button is pressed. The CD player jumps back to the cue point as soon as the CUE button is released. Also with the unit in pause mode (Play/Pause LED blinks) the search and/or jog wheel is used to set a different start point. By pressing "PLAY/PAUSE" button then "CUE", you can confirm this new cue point. The CUE LED will light up since the cue button is pressed until the CD has returned to the position at which play was started. PLAY/PAUSE button: every time you press the PLAY/PAUSE button the CD player changes from play to pause or from pause to play. PITCH BEND buttons (+/-16%): The speed rises while the "+ button" is pressed and return to the original pitch when the button is released. PITCH button: This button is used to turn the Pitch function on and off. If you want to change the speed adjustment range (+/- 8%, +/- 12% , +/- 16%), press and hold PITCH button then press the PITCH BEND+ to select. OPEN/CLOSE button: press this button to open and close the disc tray in the front of the main unit. TIME Button: The TIME button switches between elapsed playing time, remaining time in a selection and total remaining time of the disc. [. . . ] If the disc is multi session, it will only play the first session: o if the first session is CD-DA you can only play CD-DA tracks. This can be done in two ways: PITCH BEND buttons: The speed increases or decreases respectively as long as the PITCH BEND+ or PITCH BEND- button is pressed. JOG WHEEL: During play mode the JOG WHEEL will temporarily bend the pitch of the music by turning the JOG WHEEL clockwise to speed up or counterclockwise to slowdown. 64/64 character style mode-1 only 255 999 mono / stereo sampled at: 32 - 44, 1 - 48kHz 32 ­ 320 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) mono / stereo sampled at: 16 ­ 22, 05 - 24kHz 8 ­ 160 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) mono / stereo sampled at: 8 ­ 11, 025 - 12kHz 8 ­ 160 Kbps CBR (Constant Bitrate) or VBR (Variable Bitrate) Main unit 482(W) x 88, 8(H) x 262. [. . . ]