[. . . ] Select "About" from the Windows menu and verify you are running the same number build you just downloaded. CD ROM Method ***Requires a CD burner attached to your PC as well as a USB CD ROM drive attached to the Digital X Bus*** 1. Make sure you have a CD Burner and the appropriate software loaded on your computer. Download the Software update from www. mackie. com to your local hard drive. Right-click on the downloaded file and select "Extract All" from the pop-up menu. [. . . ] If there is a "System Update" file in the list and the Status column reads "Needs Update, " then highlight the "System Update" file and select "Install. " But if the Status column reads "Up to Date, " then move on to Step #12. Once you are back to the main mixer screen, select "About" from the Windows menu and verify you are running the same number build you just downloaded. 3. 12. CD ROM Method ***Requires a CD burner attached to your PC as well as a USB CD ROM drive attached to the Digital X Bus*** 1. Make sure you have a CD Burner and the appropriate software loaded on your computer. Download the Software update from www. mackie. com to your local hard drive. 9. Software Installation Instructions Create a new folder on your desktop and label it "Digital X Bus Update. " Double-click on the file you just downloaded, which should launch the WinZip Utility. Highlight all files displayed in the WinZip window, and select "Extract. " Point the WinZip Extractor to the new "Digital X Bus Update" folder on your desktop and Click "OK. " Once the Extraction is completed, close the WinZip utility. Insert a blank CD ROM into your computer's CD drive or other attached CD Burner. Open whatever CD burning software you use to create CDs from your PC, and burn all the contents of the "Digital X Bus Update" folder (or whatever you named it) directly to the CD. Remove the CD from your computer or attached CD drive and insert it into the USB CD ROM drive attached to your Digital X Bus. Select "Install Packages" from the File Menu on the Digital X Bus. Select the new build to be installed from the list and select "Run Installer. " Select "OK" when asked to shut down the Digital X Bus application in order to run the Installer. Once you are back to the main mixer screen, re-select the "Install Packages" from the File Menu. If there is a "System Update" file in the list and the Status column reads "Needs Update, " then highlight the "System Update" file and select "Install. " But if the Status column reads "Up to Date, " then move on to Step #16. Once you are back to the main mixer screen, select "About" from the Windows menu and verify you are running the same number build you just downloaded. 10. 16. Mac OS X Users USB Flash/Pen Drive (recommended) ***Requires a USB Flash/Pen drive*** 1. Insert a USB Flash Drive into your Mac so you can see the icon of that drive on your desktop. Double-click on the . zip file to create a folder on your desktop labeled after the build version you just downloaded. Open that same folder so you can see all the contents and files. 4 Mackie Digital X Bus 5. 8. Software Installation Instructions Drag all the contents of that same folder onto the icon of your Flash Drive. Remove the Flash Drive from your computer and insert it into one of the available USB ports on your Digital X Bus. Select "Install Packages" from the File Menu on the Digital X Bus. [. . . ] This should create a folder on your desktop that has the same name as the Digital X Bus Software Update file. Drag all the contents of that same folder onto the icon of your Flash Drive. Remove the Flash Drive from your computer and insert it into one of the available USB ports on your Digital X Bus. Select "Install Packages" from the File Menu on the Digital X Bus. [. . . ]