[. . . ] CX-PROFIBUS PROFIBUS configurator Advanced configuration tool that uses FDT/DTM (Field Device Tool and Device Type Manager) Technology · The PROFIBUS-DP network topology and system characteristics are defined and then downloaded in the OMRON PROFIBUS Master Unit · Configuration can be done remotely, via other networks as Ethernet or ControllerLink · Can be used with all Omron masters* Function The configuration software package for the OMRON PROFIBUSDP master is used to define: · The configuration of the bus system connected. [. . . ] After the initial configuration has been downloaded, the software package can be used for: · Addition / deletion of slave units or -modules. It is not possible to use other (general-purpose) PROFIBUS-DP Configurator software packages for this purpose More about FDT/DTM and Omron CX-PROFIBUS FDT is a frame application that provides a standard communication interface between software components that support the field devices and systems. These so-called DTMs, can be used in all configuration tools who follow the FDT specification. It provides all configuration, diagnostics and maintenance information and even graphical user dialogs of the specific device. Omron's CXPROFIBUS configuration package is a FDT frame application that includes all DTM's for Omron PROFIBUS masters and slaves. Also a Generic slave DTM for field devices that only provide a GSD-file for configuration is available. Ordering Information Name CX-PROFIBUS Model CX-Profi C200HW-PRM21 will be supported early 2004. [. . . ] P03E-EN-01 In the interest of product improvement, specifications are subject to change without notice. OMRON EUROPE B. V. Wegalaan 67-69, NL-2132 JD, Hoofddorf, The Netherlands Phone: +31 23 568 13 00 Fax: +31 23 568 13 88 www. eu. omron. com 2 [. . . ]