[. . . ] of conductors 3 4 Model E3X-CN11 E3X-CN21
Sensor I/O Connectors (Order separately)
Size Cable type Shape Cable length 2m 5m 4 conductors 2m 5m Model XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A
Straight connector
M8 Standard cable
L-shaped connector
Mobile Console (Order Separately)
Shape Model Remarks Mobile Console with head, cable, and AC adapter provided as accessories. Power supply provided by chargeable battery
(Set form) E3X-MC11
E3X-MC11-C1
Mobile Console
E3X-MC11-H1
Head
E39-Z12-1
Cable (1. 5 m)
In general, amplifier units and connectors are sold separately.
Refer to the following tables for order placement. amplifier units Type Standard models NPN PNP E3X-DA8 E3X-DAB8 E3X-DAG8 E3X-DAH8 --E3X-DA9 E3X-DA8TW E3X-CN21 E3X-CN22 Applicable Connector (order separately) Master Slave connector connector
E3X-DA6 E3X-DAB6 Mark-detecting models E3X-DAG6 Infrared models E3X-DAH6 Differential E3X-DA6D output Monitor-output models E3X-DA7 Twin-output models E3X-DA6TW
+
E3X-CN11 E3X-CN12
When using 5 sets
amplifier units (5 Units)
+
1 Master Connector + 4 Slave Connectors
A-422
Advanced Photoelectric Sensors
Rating/Performance
Amplifier units
Prewired
Type Model NPN output PNP output Standard models E3X-DA11-N E3X-DA41-N Monitor-output models Mark-detecting models Infrared models Water-resistant models E3X-DA11V E3X-DA41V Twin-output models E3X-DA11TW E3X-DA41TW
E3X-DA-S
E3X-DA21-N E3X-DAB11-N E3X-DAG11-N E3X-DAH11-N E3X-DA51-N E3X-DAB41-N E3X-DAG41-N E3X-DAH41-N Blue LED (470 nm) Green LED (525 nm) Infrared LED (870 nm)
Item Light source (wave length)
Red LED (660 nm)
Red LED (660 nm)
Power supply voltage Power consumption
12 to 24 VDC ±10%, ripple (p-p) : 10% max. at supply voltage 24 V) Digital display OFF: Power consumption 600 mW max. [. . . ] (0. 01 mm dia. ) (0. 3 mm dia. )*3 (0. 2 mm dia. ) Standard object (mm) *1 Minimum sensing object *2 (Opaque object) default
0. 5 or 1 ms 280 (1960) 60 690 450
0. 5 or 1 ms 180(1260) 40 450 290
*1. The value can be detected if the temperature varies within the operating ambient temperature. The digital value is 1000 and the value can be detected in each detection area. Refer to the E3X-DA-S for the note of the fiber unit.
(Reflective model)
Sensing distance (mm)*1 Sensitivity switching 11 steps can be set Fiber type Response time 1 270 or 570 s 80 13 HIGH 2 3-11 1 to 200 ms or 2 to 400 ms 120 20 1 270 or 570 s 45 7 LOW 2 3-11 1 to 200 ms or 2 to 400 ms 80 13 150 x 150 (0. 01 mm dia. ) 25 x 25 (0. 01 mm dia. ) Standard object (mm) *2 Minimum sensing object *3 (Opaque object) default
0. 5 or 1 ms
0. 5 or 1 ms
E32-ED11R E32-ED21R
90 15
60 10
*1. The value can be detected if the temperature varies within the operating ambient temperature. (Value when the sensing object is operating) Note: Refer to E3X-DA-S for the note of the fiber unit.
E3X-DA-S
A-425
Differences from E3X-DA-S amplifier unit
Differential output type (edge detection type) Item Item NPN output Power consumption Control ON/OFF output output Detection mode Response time Timer function APC Func Zero reset tions Initial reset Sensitivity switching Teaching level Indicator lamp Prewiring type E3X-DA11D amplifier units with Connectors E3X-DA6D
Power consumption 960 mW max. (at power supply voltage 24 V, power consumption 40 mA max. ) Load current 50 mA (residual voltage NPN/PNP: 1 V max. L ON The range between the CH1 and CH2 thresholds turns ON D ON The range between the CH1 and CH2 thresholds turns OFF (CH2 is always OFF)
E3X-DA-S
A-427
PNP output
Model Output transistor Status Timing chart
Incident light No incident light T ON Operation Indicator OFF (orange) ON Output transistor OFF Operate Load (relay) Release (Between blue and black) Incident light No incident light T Operation ON Indicator OFF (orange) ON Output transistor OFF Operate Load (relay) Release (Between blue and black) Incident light No incident light T Operation ON Indicator OFF (orange) ON Output transistor OFF Operate Load (relay) Release (Between blue and black) Incident light No incident light T Operation ON Indicator OFF (orange) ON Output transistor OFF Operate Load (relay) Release (Between blue and black) CH1/ Incident light CH2 No incident light Operation Indicator (orange) Output transistor Operation Indicator (orange) Brown
Mode selection switch
Output circuit
E3X-DA41-N E3X-DAB41-N E3X-DAG41-N E3X-DAH41-N E3X-DA41V E3X-DA8 E3X-DAB8 E3X-DAG8 E3X-DAH8 E3X-DA44V
Light ON
L ON (LIGHT ON)
1
Display Main circuit Black Control output Load
3
4
12 to 24 VDC
Blue
Dark ON
D ON (DARK ON)
Connector Pin Arrangement
1
2
4 3
Note: Pin 2 is not used.
Light ON
L ON (LIGHT ON)
Display
Operation Indicator (orange) Brown
E3X-DA51-N E3X-DA9
Main circuit 47W
Black
Control output
Monitor output Load 1 to 5 V (see note) Orange Load Blue
12 to 24 VDC
Dark ON
D ON (DARK ON)
Note: Load resistance: 10kWmin.
Light ON
E3X-DA41TW E3X-DA8TW
T ON OFF ON OFF Operate Load (relay) Release (Between blue and black) CH1/ ncident light CH2 No incident light Operation Indicator (orange) Output transistor ON OFF ON OFF
L ON (LIGHT ON)
Operation Indicator (orange) Display
Operation Indicator (orange) Brown Control output 1 Black Control output 2 Orange Load
Main circuit
12 to 24 VDC Load
T
Dark ON
D ON (DARK ON)
Blue
Operate Load (relay) Release (Between blue and black)
Note: With E3X-DA#TW models, only channel 1 is output when set for area sensing operation. L ON The range between the CH1 and CH2 thresholds turns ON D ON The range between the CH1 and CH2 thresholds turns OFF (CH2 is always OFF)
Connectors (Sensor I/O Connectors)
Color of cable conductors Brown White Blue Black XS3F-M421-402A XS3F-M421-405A XS3F-M422-402A XS3F-M422-405A
Class
4 3
2 1
1 2 3 4
Wire, outer jacket color Brown
Connector pin No. A B C D
Application Power supply (+V) Power supply (0 V) Output
For DC
White Blue Black
Note: Pin 2 is open.
A-428
Advanced Photoelectric Sensors
Characteristic data (default)
Hysteresis vs. sensing distance Reflective model E32-D11L
Hysteresis (mm)
30 25 20 15 10 5 0 Superhigh-speed Superlong-distance 100 200 300 400 500 Sensing object: White paper
Distance Hysteresis
Repeat accuracy (mm)
100 Sensing object: White paper 90
X
80 70 60 50 40 30 20 10 0 20 40 60
ON
ON OFF
Standard
Superhighspeed Standard
Superlong-distance 80 100
Distance (mm)
Distance (mm)
Monitor output vs. In that case, low the sensitivity (raise the threshold) to stabilize detection. EEPROM Write Error If a write error occurs (operation indicator starts flashing) due to power-off, static electricity or other noise in the teaching mode, perform teaching again. Optical communication When connecting the amplifier units, assemble them in close contact. Hysteresis adjustment The Mobile Console allows hysteresis adjustment, but note that the unit may not operate properly if the hysteresis setting is lower than the factory value.
2. Slide one unit toward the other, match the clips at the front ends, and then bring them together until they "click".
Clip
Click into place
(Removing) Slide one unit away from the other and remove them one by one. (Do not remove the connected units together from the DIN rail. )
Note:1 . When the amplifier units are connected to each other, the operable ambient temperature changes depending on the number of connected amplifier units. 2 . Before connecting or removing the units, always switch power off.
Fitting of Mobile Console head When fitting the Mobile Console head, a 20 mm or more clearance is needed on the left side.
20mm
Use of Mobile Console For the twin output type (E3X-DA##TW), up to 16 channels (eight E3X-DA##TW units) can be set from the Mobile Console E3X-MC11. (Note that the operation mode and area detection cannot be set. )
A-434
Advanced Photoelectric Sensors
Amplifier Unit Connectors
Installation Connector installation 1. Insert the Master or Slave Connector into the amplifier unit until it clicks into place.
Insert Clip
2. Link amplifier units to each other after the master and slave Connectors have been inserted. Apply the supplied seal to the non-connecting surface of the master/slave connector.
The sensor bottom is also equipped with a clip removing mechanism. [. . . ] 4-dia. , 3-conductor, vinyl-insulated round cable (conductor cross-sectional area: 0. 2 mm²; insulation diameter: 1. 1 mm is used.
A-436
Advanced Photoelectric Sensors
*2
3 Two, 2. 4 dia. 10
Operation Indicator 64. 3 38. 6 5. 3
Mounting Holes
8 31. 5 9. 9 10. 7 3. 4 22. 4 13 Two, 3. 2 dia. A 4-dia. , 4-conductor, vinyl-insulated round cable (conductor cross-sectional area: 0. 2 mm²; insulation diameter: 1. 1 mm) is used. 16 34. 8
Hole for optical communications
2-M3
10. 75
16
2. 4 4
Mounting Bracket (E39-L143)SUS304 stainless steel, sold separately
22. 4
16
Connector type E3X-DA6E3X-DAG6 E3X-DA7E3X-DAH6 E3X-DA8E3X-DAB8 E3X-DA9E3X-DAG8 E3X-DAB6E3X-DAH8 E3X-DA6D
10
Incident level display Threshold level display Operation Indicator
13. 05 17. 15 3 Two, 2. 4 dia.
4. 9 x 3 = 14. 7 64. 3
8 9. 9 10. 7 3. 4 1. 8 13 5. 1 3. 9 1. 7 4. 2 1. 8 38. 6 36. 7
31. 5 14
5. 5
Hole for optical communications
6. 2
1. 7
Dimensions with Master Connector Connected
71 67. 5 64. 3 E3X-CN11: 4. 0 dia. [. . . ]