[. . . ] [. . . ] The digital outputs of the FOH console are then being sent to the FireStudio Lightpipe so that the performance can be recorded on a computer. The entire digital signal path is being clocked to the digital console via BNC, so the 3 DigiMax FS and the FireStudio Lightpipe must be set to clock externally via BNC. Because of the compact size of the DigiMax D8, it is necessary to use a BNC T-Connector with 3 Female inputs, rather than the standard Male - Female - Female iteration when using both parallel wordclock distribution and all 8 direct analog outputs at the same time. 75 ohm BNC DigiMax D8 rear to ec nn Co ) T- -F-F CF BN ( r 24 Channel XLR (F) - XLR (M) sanke with Stage Box B tor ec nn Co -F) T- -F NC (F 75 ohm BNC DigiMax D8 rear B tor ec nn Co -F) T- -F NC (F STAGE 75 ohm BNC DigiMax D8 rear ADAT 24 Channel TRS-TRS snake FOH Digital Console Lapt op Analog Monitor Mixer FireStudio Lightpipe rear FW400 cable What you will need: FireStudio Lightpipe front FireStudio Lightpipe Mixer set to Terminate BNC FireStudio Lightpipe Mixer set to clock externally via BNC 1 24 Channel XLR Snake with Stage Box 1 24 Channel TRS - TRS snake 7 75 ohm BNC cables 3 F-F-F BNC T-Connectors PreSonus Audio Electronics | 7257 Florida Blvd, Baton Rouge, LA USA | Tel: 225-216-7887 | Fax: 225-926-8347 | www. presonus. com | sales@presonus. com [. . . ] [. . . ]