[. . . ] www. vaisala. com WM30 Wind Sensor for Mobile Applications Flexible outputs A relay contact output is provided for wind speed. [. . . ] This provides full protection against water, dust, pollutants and electromagnetic interference. Accurate wind measurement The shape, dimensions, and material of the cups contribute to accurate measurement. The cups are carefully tested to give linear response between the wind speed and the angular velocity of the cup wheel. The wind vane is located directly beneath the cup assembly and is made of a durable, lightweight material that ensures fast response and low inertia. Easy installation A mast adapter for a 30 mm tube is supplied with the sensor. 110 mm, is available as an option. Technical data Wind speed Measurement range 0. 5 . . . 60 m/s Starting threshold < 0. 4 m/s Distance constant 2m Transducer output 1 Hz ~ 0. 7 m/s Accuracy (within range 0. 4 . . . 60 m/s) wind speed < 10 m/s ± 0. 3 m/s wind speed > 10 m/s ± 2% Characteristic transfer function U = -0. 24 + 0. 699 × F (where U = wind speed [m/s], F = output frequency [Hz]) General Supply voltage 3 . . . 15 VDC Electrical connections 5-pin male with 12 mm threads Recommended connector at cable end BINDER 99 1436 814 05 Operating temperature -40 . . . +149 °F) Material housing AlMgSi, gray anodized cups PA, reinforced with carbon fibre, black vane PA, reinforced with fiberglass, white Dimensions 265 (h) × 360 (Ø) mm Weight 360 g Wind direction Measurement range WMS301 with 1-wiper potentiometer WMS302 with 2-wiper potentiometer Starting threshold Damping ratio Overshoot ratio Delay distance Accuracy 0 . . . [. . . ] All specifications -- technical included -- are subject to change without notice. [. . . ]