[. . . ] This foot should only be used if it is fastened tight to the TV set with the screw fitting. [. . . ] Align the plastic caps lengthwise with the foot and screw tightly with the screws and nuts E. Guide the connecting cable through the shaft G or guide it through the rear wall recess. 4 Place the XENTIA TV set slowly and carefully onto the plastic caps F in the foot. Hang the support bracket A in the ventilation openings in the back of the appliance which match the hole diagram and screw tight with the screws and nuts B. Then screw in the TV set to the foot from underneath with the screws C. Attach the rear wall of the foot ­ after laying the cable G ­ and screw tightly with the screws H (4x). [. . . ] This foot should only be used if it is fastened tight to the TV set with the screw fitting. [. . . ]