[. . . ] DIGITAL CABLE RECEIVER
DCR 1784 CO
CONTENTS ____________________________________________
4
4 4 4
General information
Packing contents Receiving digital stations Special features of your digital receiver
5 6-7
6 6 7
Set-up and safety Overview
The digital satellite receiver The infrared receiver The remote control
8-9
8 8 8 9 9 9
Connection and preparation
Connecting the antenna Connecting the television Connecting the infrared receiver Connecting the digital multi-channel amplifier Connecting the power supply unit Inserting batteries in the remote control
10-14
10 11-12 12-13 14
Basic settings
The menu Searching for stations Creating and editing favourite lists Filtering stations in the station list
15-17
15 15 15 15 16 16 16 16 16 17
Basic functions
Switching on and off Mode selection Selecting presets Selecting stations from lists Switching from the current station to the previous one Adjusting the volume Muting the sound Displaying the time Using options Electronic TV Guide
18
18 18
Teletext mode
Teletext Additional functions
19-25
19-20 20-21 22-23 24-25
Settings
Picture settings Language settings Menu settings Miscellaneous settings
26
The recording timer
2
CONTENTS ____________________________________________
27
27
Additional functions
Security functions
28-31
28 29 30 30 31
Special settings
Automatic station search Manual station search Resetting the digital receiver to its original state Updating the digital receiver software Changing remote control levels
32
32 32
Pay TV mode
Inserting a Smart card Using a Smart card
33-35
33 33 34 34 35
Information
Displaying station reception properties Displaying device information Technical data Environmental note Troubleshooting
ENGLISH
3
GENERAL INFORMATION __________________
Packing contents
1 2 3 4 5 6 Digital Satellite Receiver DCR 1784 CO Tele Pilot 765 S remote control 2 batteries for the remote control (2 x 1. 5 V, AA type batteries) SCART extension cable Power supply unit Operating manual
Receiving digital stations
To use your new DCR 1784 CO digital receiver you need a digital outdoor antenna. Unlike analogue broadcasting, not every station has its own transmission frequency. Instead, several stations are grouped into what are known as bouquets on a regional or national level. You can find the current transmission information on teletext from various broadcasters, or look in a TV guide or on the Internet.
Special features of your digital receiver
The DCR 1784 CO digital receiver can receive and process all unencrypted digital stations. [. . . ] Press » « or » « to select the setting.
Selecting the standard setting
You can reset the screen settings back to the default settings (factory settings) with this function. 1 2 Select »Restore Default Settings« with »P-« or »P+« and press »OK« to confirm. Using » «, set the security query to »Yes« and confirm this with »OK«.
Ending the settings
1 Press »i« to finish the setting.
Language settings
1 2 Press »i« to open the main menu. Select »Box Settings« with »P+« or »P-« and press »OK« to confirm. Select »Language Settings« with »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections.
3
Setting the menu language
1 2 Select »Menu Language« with »P-« or »P+«. Press » « or » « to select the language.
20
SETTINGS ______________________________________________
Selecting the preferred audio language
You can set a preferred language for all programmes. 1 2 Select »Audio Language« with »P-« or »P+«. Press » « or » « to select the language.
Selecting a second audio language
If the programme is not broadcast in the language selected in »Audio Language«, the »Second audio language« is used. 1 2 Select »Audio Language #2« with »P-« or »P+«. Press » « or » « to select the language.
Select the subtitle language
You can select the language for the subtitles. 1 2 Select »Subtitle Language« with »P-« or »P+«. Press » « or » « to select the language.
Selecting the second subtitle language
If the subtitles are not broadcast in the language selected in »Subtitle language«, the »Second subtitle language« is used. 1 2 Select »Subtitle Language #2« with »P-« or »P+«. Press » « or » « to select the language.
Automatic subtitles
You can set the subtitles so that they automatically appear when they are transmitted in the selected subtitle language. 1 2 Select »Subtitles Automatic« by pressing »P-« or »P+«. Press » « or » « to switch this function on or off.
Ending the settings
1 Press »i« to finish the setting.
21
ENGLISH
SETTINGS ______________________________________________
Menu settings
1 2 3 Press »i« to open the main menu. Select »Box Settings« with »P-« or »P+« and press »OK« to confirm. Select »Menu Settings« with »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections.
Info banner display duration
You can specify how long the info banner is to be displayed when changing the channel. Select »None« if you do not want the info banner to appear. 1 2 Select »Info Banner Duration« by pressing »P-« or »P+«. [. . . ] Select »Conax Conditional Access« with »P+« or »P-« and press »OK« to confirm. The functions depend on the Smart card you are using.
Selecting information on Conax CA
1 2 Select » About Conax CA« by pressing »P-« or »P+«. Press »i« to quit the menu.
32
INFORMATION_____________________________________
Displaying station reception properties
1 2 3 Press »i« to open the main menu. Select »Technical Information« with »P-« or »P+« and press »OK« to confirm. [. . . ]